看了好多帖子，具体操作按照这个帖子来的
http://bbs.mydigit.cn/read.php?tid=477165 用的6692_HY26_256P_8KB.INI 量产一直是error8 查了下应该是容量不匹配的意思，想问下这个要怎么办？为什么同样的u盘我的就不能量产成功啊，求各位帮看下能不能量产成功。
report 如下：
Device 1:0xB4
MP Version:2.182
INI_File_Name:6692_HY26_256P_8KB.INI
Random delay 0 msec
--- Download MP ISP ---
Auto CE: 0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
CE-0, Flash ID=98-DE-94-82-76-56-04-20
Page/Block=256
Searching SORTING BOARD table ...
--> Not Found
Found BACKUP Table (0000023A-0002)
Found BACKUP Table (0000033A-0003)
Original Bad Block - 0:0x0002
Original Bad Block - 0:0x0003
.......中间太多省略了.....
Original Bad Block - 0:0x1018
Original Bad Block - 0:0x101A
Original Bad Block - 0:0x101B
Defect Table shows 3178 Good blocks, 946 Bad blocks
SafeErase (0,4124)
Erase failed Block - 0:0:0x0002
Erase failed Block - 0:0:0x0003
.......中间太多省略了.....
Erase failed Block - 0:0:0x1017
Erase failed Block - 0:0:0x1018
Erase failed Block - 0:0:0x101A
Erase failed Block - 0:0:0x101B
---> Max Bad of Plane (246,264)
---> Max BAD/DIE = 264
Total good blocks after SCAN: 3105 / 4124, Bad block=1019
==> 2-Plane mode
Max. Bad Block Allowed = 202(1019)
### Error: Too many bad block.
### Error: Low level format failed ###
SafeErase (0,4124)
Erase failed Block - 0:0:0x0002
Erase failed Block - 0:0:0x0003
Erase failed Block - 0:0:0x0006
Erase failed Block - 0:0:0x0007
Erase failed Block - 0:0:0x000A
Erase failed Block - 0:0:0x000B
.......中间太多省略了.....
Erase failed Block - 0:0:0x1018
Erase failed Block - 0:0:0x101A
Erase failed Block - 0:0:0x101B
---> Max Bad of Plane (246,264)
---> Max BAD/DIE = 264
芯片信息这些：
