固态硬盘是ADATA ASP900S7-64GM。
前天晚上正常关机，转天再开机，固态就直接识别不出来了，于是想自己试试开卡。
我笔记本是DELL INSPIRON 7520，把固态接在硬盘位，从mSATA 引导的win10 64位，用hyper-v虚拟的Fedora 14 32位的系统，其余按照网上的教程操作。其中编辑Config那步写保护试过有或没有，每次都报错Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)。由于颗粒上看不出是哪家的，所以我把所有SF2241, Package Count =8 , Package Density=64的config ID都试了一遍，都是报这个错。想请问大神们，这个是说明是硬盘本身芯片坏了，不仅仅是掉固件的问题导致的，还是我开卡过程有啥问题导致的？有人知道这个盘的Config ID 应该是啥么?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Fri, 09/21/2018 @03:35:27
End Time: Fri, 09/21/2018 @03:35:43
OverallResult: FAIL
ExitCode:(0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 1:0:1:0
argv[3]:/media/Linux/1/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
argv[4]:/media/Linux/1/28041.123456.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/Linux/1
argv[8]: 123.log
Log File:SF_Genesis_Main_Log__Fri_09.21.2018_03.35.27.log
Hostname: linux
Host IP Address: 127.0.0.1
Port Number: 2
DeviceName: /dev/sg2
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 1823:56:17 UTC 2010 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utilityv1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, AllRights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/21/2018 03:35:27] - SF_Genesis hasbeen invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 1:0:1:0
argv[3]:/media/Linux/1/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
argv[4]:/media/Linux/1/28041.123456.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]:log=/media/Linux/1
argv[8]: 123.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/21/2018 03:35:27] - Instructing theoperating system to purge any existing cached data for device: '1:0:1:0'
[Fri 09/21/2018 03:35:32] - Issuing adiscovery command for device: '1:0:1:0'
[Fri 09/21/2018 03:35:38] - Discoverycommand completed...
[Fri 09/21/2018 03:35:38] - Waiting 5seconds for the system to settle...
[Fri 09/21/2018 03:35:43] - Devicedesignation string '1:0:1:0' is mapped to node '/dev/sg2'
[Fri 09/21/2018 03:35:43] - Proceeding toprocess SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg2
MFP Package Filename =/media/Linux/1/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
Configuration File = /media/Linux/1/28041.123456.driveconfig
Serial No. = 12345
World Wide Name = www_123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/21/2018 03:35:43] - Successfullyreceived the IDENTIFY data from the drive...
[Fri 09/21/2018 03:35:43] - ValidatingManufacturing Firmware Package:/media/Linux/1/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
[Fri 09/21/2018 03:35:43] - Successfullyopened the package:/media/Linux/1/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
[Fri 09/21/2018 03:35:43] - file /media/Linux/1/28041.123456.driveconfigLoaded successfully
[Fri 09/21/2018 03:35:43] - Warning: Unable to query diagnostics information toperform power management settings check
[Fri 09/21/2018 03:35:43] - B01 PowerManagement configuration request detected
[Fri 09/21/2018 03:35:43] - Successfullyextracted *.DriveConfig file: /media/Linux/1/28041.123456.driveconfig
[Fri 09/21/2018 03:35:43] - ExtractedConfig_ID: 1 (28041) in DriveConfig file:/media/Linux/1/28041.123456.driveconfig
[Fri 09/21/2018 03:35:43] - ExtractedSerialOutputControl: 0
[Fri 09/21/2018 03:35:43] - Searching forflashware image for configuration 28041
[Fri 09/21/2018 03:35:43] - Manifest foundfor configuration 28041
[Fri 09/21/2018 03:35:43] - Flashware imageextracted:28041_fw_cl_mlc_MIC_64Gb_MT29F64G08CBABBWP_1Q_2C_1D_S_PP_R01365_s512.vic
[Fri 09/21/2018 03:35:43] - Searching formanufacturing image for configuration 28041
[Fri 09/21/2018 03:35:43] - Manifest foundfor configuration 28041
[Fri 09/21/2018 03:35:43] - Manufacturingimage extracted:28041_mf_mlc_MIC_64Gb_MT29F64G08CBABBWP_1Q_2C_1D_S_PP_R01365_s512.vic
[Fri 09/21/2018 03:35:43] - Proceeding innon-ROM mode, Download feature 3...
[Fri 09/21/2018 03:35:43] - FATAL_ERROR:Could not download MFB to thedrive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0- No Sense: 114 (0x72) OK
1- Recovered Error: 11 (0x0B) FAIL
2- Not Ready: 0 (0x00) OK
3- Medium Error: 0 (0x00) OK
4- Hardware Error: 0 (0x00) OK
5- Illegal Request: 0 (0x00) OK
6- Unit Attention: 0 (0x00) OK
7- Data Protect: 14 (0x0E) OK
8- Blank Check: 9 (0x09) OK
9- Vendor Specific: 12 (0x0C) OK
10- Copy Aborted: 0 (0x00) OK
11- Aborted Command: 4 (0x04) FAIL
12 -Equal Comparison: 0 (0x00) NA
13- Volume Overflow: 128 (0x80) NA
14- Miscompare: 0 (0x00) OK
15- Reserved: 0 (0x00) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 6.646183] dracut: Switching root
[ 6.916198] SELinux: initialized (dev usbfs, type usbfs), usesgenfs_contexts
[ 7.016154] readahead: starting
[ 8.663502] udev[502]: starting version 161
[ 9.438688] piix4_smbus 0000:00:07.3: SMBus base address uninitialized -upgrade BIOS or use force_addr=0xaddr
[ 9.455735] microcode: CPU0 sig=0x306a9, pf=0x1, revision=0xffffffff
[ 9.484135] microcode: Microcode Update Driver:v2.00 <
tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 11.383271] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 11.856497] EXT4-fs (sda1): mounted filesystem with ordered data mode.Opts: (null)
[ 11.857849] SELinux: initialized (dev sda1, type ext4), uses xattr
[ 12.768983] Adding 2031612k swap on /dev/mapper/vg_linux-lv_swap. Priority:-1 extents:1 across:2031612k
[ 12.773067] SELinux: initialized (dev binfmt_misc, type binfmt_misc),uses genfs_contexts
[ 13.264504] NET: Registered protocol family 10
[ 13.264725] lo: Disabled Privacy Extensions
[ 13.271151] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.382744] RPC: Registered udp transport module.
[ 14.382746] RPC: Registered tcp transport module.
[ 14.382747] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.388049] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), usesgenfs_contexts
[ 16.484415] mtrr: type mismatch for f8000000,400000 old: write-back new:write-combining
[ 25.123528] fuse init (API version 7.14)
[ 25.148784] SELinux: initialized (dev fuse, type fuse), usesgenfs_contexts
[ 25.164686] SELinux: initialized (dev fusectl, type fusectl), usesgenfs_contexts
[ 111.843996] SELinux: initialized (dev sdb1, type fuseblk), usesgenfs_contexts
[ 321.415136] sd 1:0:1:0: [sdc] Synchronizing SCSI cache
[ 321.428793] sd 1:0:1:0: [sdc] Stopping disk
[ 321.429458] ata2.01: disabled
[ 326.436516] ata2: soft resetting link
[ 326.783395] ata2.00: NODEV after polling detection
[ 326.817522] ata2.01: ATA-8: Virtual HD, 1.1.1, max MWDMA2
[ 326.817524] ata2.01: 64 sectors, multi 128: LBA48
[ 326.854611] ata2.01: configured for MWDMA2
[ 326.854620] ata2: EH complete
[ 326.854846] scsi 1:0:1:0: Direct-Access ATA Virtual HD 1.1. PQ: 0 ANSI:5
[ 326.864367] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 326.867097] sd 1:0:1:0: [sdc] 64 512-byte logical blocks: (32.7 kB/32.0KiB)
[ 326.867099] sd 1:0:1:0: [sdc] 4096-byte physical blocks
[ 326.867126] sd 1:0:1:0: [sdc] Write Protect is off
[ 326.867127] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 326.867139] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled,doesn't support DPO or FUA
[ 326.867576] sdc: unknownpartition table
[ 326.879078] sd 1:0:1:0: [sdc] Attached SCSI disk
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/21/2018 03:35:43] - End of Genesismanufacturing log.
[Fri 09/21/2018 03:35:43] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Fri, 09/21/2018 @ 03:35:27 </Start_Time>
<End_Time> Fri, 09/21/2018 @ 03:35:43 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code>(0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 1:0:1:0
argv[3]: /media/Linux/1/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
argv[4]:/media/Linux/1/28041.123456.driveconfig
argv[5]: 12345
argv[6]: www_123
argv[7]: log=/media/Linux/1
argv[8]: 123.log
</Input_Parameters>
<Log_File> SF_Genesis_Main_Log__Fri_09.21.2018_03.35.27.log</Log_File>
<Hostname> linux </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 2 </Port_Number>
<Device_Name> /dev/sg2 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit</SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit</SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 1823:56:17 UTC 2010 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Fri 09/21/2018 03:35:43] - Overall Result forDevice: /dev/sg2 ****** FAIL ******
