之前本来想让M大修我的M4的，后来想想反正修好也没啥意思，干脆玩下2281，然后，彻底悲剧。。。。。是不是闪存没焊好的原因？
板子如下，log如下
<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Tue, 10/06/2015 @ 14:29:43
End Time: Tue, 10/06/2015 @ 14:29:59
OverallResult: FAIL
ExitCode: (0x10090012:SF_GENESIS_IDENTIFY_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 5:0:0:0
argv[3]: /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
argv[4]: /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/27080.0.driveconfig
argv[5]: 1
argv[6]: 12
argv[7]: LOG=/media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/1st/1_localhost.localdomain_DATETIMESTAMP_5.0.0.0_PROCESS_SSD_RESULT.log
Log File: /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/1st/1_localhost.localdomain_DATETIMESTAMP_5.0.0.0_PROCESS_SSD_RESULT.log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 7
DeviceName: /dev/sg7
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 10/06/2015 14:29:43] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 5:0:0:0
argv[3]: /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
argv[4]: /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/27080.0.driveconfig
argv[5]: 1
argv[6]: 12
argv[7]: LOG=/media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/1st/1_localhost.localdomain_DATETIMESTAMP_5.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 10/06/2015 14:29:43] - Instructing the operating system to purge any existing cached data for device: '5:0:0:0'
[Tue 10/06/2015 14:29:48] - Issuing a discovery command for device: '5:0:0:0'
[Tue 10/06/2015 14:29:54] - Discovery command completed...
[Tue 10/06/2015 14:29:54] - Waiting 5 seconds for the system to settle...
[Tue 10/06/2015 14:29:59] - Device designation string '5:0:0:0' is mapped to node '/dev/sg7'
[Tue 10/06/2015 14:29:59] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg7
MFP Package Filename = /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
Configuration File = /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/27080.0.driveconfig
Serial No. = 1
World Wide Name = 12
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 10/06/2015 14:29:59] - FATAL_ERROR: Could not get the IDENTIFY data from the drive... (0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x00EC (236)
ATA FEATURE : 0x0000 (0)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 8 (0x08) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 1 (0x01) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 170.721712] sd 5:0:0:0: [sde] Synchronizing SCSI cache
[ 170.721772] sd 5:0:0:0: [sde] Stopping disk
[ 170.722718] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 170.722723] ata6.00: irq_stat 0x40000001
[ 170.722728] ata6.00: failed command: STANDBY IMMEDIATE
[ 170.722737] ata6.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 170.722740] res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 170.722744] ata6.00: status: { DRDY ERR }
[ 170.722747] ata6.00: error: { ABRT }
[ 170.722758] ata6.00: device reported invalid CHS sector 0
[ 170.722775] sd 5:0:0:0: [sde] START_STOP FAILED
[ 170.722778] sd 5:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 170.722783] sd 5:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor]
[ 170.722790] sd 5:0:0:0: [sde] Add. Sense: No additional sense information
[ 170.722834] ata6.00: disabled
[ 175.717182] ata6: hard resetting link
[ 176.020668] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 176.020816] ACPI Error (psargs-0359): [DSSP] Namespace lookup failure, AE_NOT_FOUND
[ 176.020824] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node f683cf60), AE_NOT_FOUND
[ 176.021664] ata6.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[ 176.021668] ata6.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 176.025216] ACPI Error (psargs-0359): [DSSP] Namespace lookup failure, AE_NOT_FOUND
[ 176.025224] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node f683cf60), AE_NOT_FOUND
[ 176.027347] ata6.00: configured for UDMA/133
[ 176.027356] ata6: EH complete
[ 176.027511] scsi 5:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
[ 176.028944] sd 5:0:0:0: [sde] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 176.028950] sd 5:0:0:0: [sde] 4096-byte physical blocks
[ 176.029027] sd 5:0:0:0: [sde] Write Protect is off
[ 176.029031] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 176.029053] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 176.030363] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 176.031062] sde: unknown partition table
[ 176.040290] sd 5:0:0:0: [sde] Attached SCSI disk
[ 186.022733] ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 186.022740] ata16.00: irq_stat 0x40000001
[ 186.022746] scsi 15:0:0:0: [sg7] CDB: ATA command pass through(12)/Blank: a1 08 2e 00 01 00 00 00 00 ec 00 00 00 00 00 00
[ 186.022771] ata16.00: cmd a0/01:00:00:00:02/00:00:00:00:00/a0 tag 0 dma 512 in
[ 186.022773] res 50/00:08:01:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 186.022778] ata16.00: status: { DRDY }
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 10/06/2015 14:29:59] - End of Genesis manufacturing log.
[Tue 10/06/2015 14:29:59] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Tue, 10/06/2015 @ 14:29:43 </Start_Time>
<End_Time> Tue, 10/06/2015 @ 14:29:59 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090012:SF_GENESIS_IDENTIFY_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 5:0:0:0
argv[3]: /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
argv[4]: /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/27080.0.driveconfig
argv[5]: 1
argv[6]: 12
argv[7]: LOG=/media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/1st/1_localhost.localdomain_DATETIMESTAMP_5.0.0.0_PROCESS_SSD_RESULT.log
</Input_Parameters>
<Log_File> /media/OS/SF/FW_PPRO_5_2_2_Release.672199.release--0/1st/1_localhost.localdomain_DATETIMESTAMP_5.0.0.0_PROCESS_SSD_RESULT.log </Log_File>
<Hostname> localhost.localdomain </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 7 </Port_Number>
<Device_Name> /dev/sg7 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Tue 10/06/2015 14:29:59] - Overall Result for Device: /dev/sg7 ****** FAIL ******
[ 此帖被qjj2857在2015-10-07 14:19重新编辑 ]
