新买的朗科U235 主控3s6691量产后0字节了
主控 sss6691
芯片上的字为 115t051lf
hvpf4F5
1034
115T051LF 3S
详见图片
请问我应该用什么软件量产~~
拆开后在芯片边上还有一组数据不知是什么意思
PBU458M02
2010.09.20
图片上可以看清楚的
Starting Time: 17:17:33
Device 1:0xB3
MP Version:2.162
INI_File_Name:
Random delay 0 msec
--- Download MP ISP ---
CE-1, Flash ID=98-D7-94-32-76-55-0C-00
--> ROOT is not found
Scan (1,4100)
Original Defect Block - 1:0:0x0738
Original Defect Block - 1:0:0x0A6F
Original Defect Block - 1:0:0x0BA0
Original Defect Block - 1:0:0x0ECC
Original Defect Block - 1:0:0x0ECE
Original Defect Block - 1:0:0x0F3A
Original Defect Block - 1:0:0x0F3C
Original Defect Block - 1:0:0x0F3E
Original Defect Block - 1:0:0x0FC9
Original Defect Block - 1:0:0x0FCB
---> Max Bad of Plane (4,2)
---> Max BAD/DIE = 4
Total good blocks after SCAN: 4090 / 4100, Bad block=10
==> 2-Plane mode
Max. Bad Block Allowed = 183(10)
Adjust Max LBA = 7823360, 7823296
MaxWindows=2/1910, MaxLBA=7823296, Size=3819 MB
Max BAD of one plane is 4 (45),4100,1,1
RootSector=0xF4B,Sec/Cluster=32, SuperPage=32 ---> Alignment=21
Boot Block=0x0001,0x0002
Lun0(7823296), Lun1(0), Public=7823296, Secure=0, CDROM=0
Special FE Config = 54-0B-00
Defect Table Block=0x0004
--- Download ISP Code:D:\SSS6691\ISP_CODE\6691_B3-A_20100224_VA10D00_E13E.BIN---
--- ISP Code installed.
Lun0(7823296), Lun1(0), Public=7823296, Secure=0, CDROM=0
Public,Secure,CDROM = 7823296,0,0
SN=0012F02B82F4F110279F14F9
=== Preformat Done ===
Low Level Format DONE
Store INI/ERROR MSG to Block-0x0001:79.
Total=0,CDROM=0, PublicArea=-128, SecureArea=0
### Err: SECURE failed(31).
Ending Time: 17:17:41
