有个kst的dt G2，32G的，是6690加东芝43nm MLC，th58nvg7d2ela48
今天心血来潮下个量产软件看看信息，下的是2.159的，就带一个6690_B1-A_20110908_V150B_78E3.bin，默认配置文件
直接运行了，手贱点了两下鼠标，就start了貌似，然后迅速报错，没见到scan之类
然后就杯具了，请插入磁盘的对话框
然后重新改了配置文件，改了vidpid（原来都是0），删掉了CDROM字段（D盘没有那个文件）
然后量产，四个scan，四个safeerase后，在第四个safeerase中间报fail，error 8，report里边大致是太多坏块
配置文件添加id17后，同一位置error 25，
我贴一段关键的report
Starting Time: 22:37:22
Device 1:0xB1
MP Version:2.159
INI_File_Name:6690_D2.INI
Random delay 0 msec
--- Download MP ISP ---
CE-0, Flash ID=98-DE-95-32-7A-54-0A-00
CE-1, Flash ID=98-DE-95-32-7A-54-09-00
CE-2, Flash ID=98-DE-95-32-7A-54-09-00
CE-3, Flash ID=98-DE-95-32-7A-54-0A-00
--> ROOT is not found
Scan (0,8296)
Original Defect Block - 0:0:0x0011
Original Defect Block - 0:0:0x0045
Original Defect Block - 0:0:0x007F
Original Defect Block - 0:0:0x009D
Original Defect Block - 0:0:0x009F
Original Defect Block - 3:1:0x2FF4
Original Defect Block - 3:1:0x3004
Original Defect Block - 3:1:0x3006
---> Max Bad of Plane (25,31)
---> Max BAD/DIE = 1022
Total good blocks after SCAN: 5764 / 33184, Bad block=27420
==> 2-Plane mode
MaxWindows=16/-22, MaxLBA=10289152, Size=5024 MB
Max BAD of one plane is 1022 (1024),33184,2,4
RootSector=0x13FD,Sec/Cluster=32, SuperPage=32 ---> Alignment=3
Boot Block=0x0001,0x0002
Lun0(10289152), Lun1(0), Public=10289152, Secure=0, CDROM=0
Special FE Config = 54-0B-00
### Err: Preformat Abort ###
not enought block for d-block + min_algorithm_need
### Error: Low level format failed ###
Store INI/ERROR MSG to Block-0x0001:79.
SafeErase (0,8296)
Erase failed Block - 0:0:0x0011
Erase failed Block - 0:0:0x0045
Erase failed Block - 0:0:0x007F
Erase failed Block - 0:0:0x009D
Erase failed Block - 0:0:0x009F
Erase failed Block - 0:0:0x00EA
Erase failed Block - 0:0:0x0100
Erase failed Block - 0:0:0x0101
Erase failed Block - 0:0:0x0102
Erase failed Block - 3:1:0x3004
Erase failed Block - 3:1:0x3006
---> Max Bad of Plane (25,31)
---> Max BAD/DIE = 1022
Ending Time: 22:38:50
求救啦，我连数据都没备份。。。悲摧阿
