|
|
U盘是黄色的伸缩的DataTraveler G2 4GB，芯片是SSS 6691。之前量产一直用这个INI文件：- [OEM]
- PN=TIGER
- Note=ISP:6691_B3-D3_20100324_VA20C00_FD50.BIN
- VID=0x0951
- PID=0x1624
- VENDOR_NAME="TIGER"
- PRODUCT_NAME="TIGER"
- DOS_Volume="老虎﹏"
- STRING_DESC_ENABLE=1
- [FEATURE_SETTING]
- FLASH_OP="ALL123"
- ID17=1
- ID35=1
- [ISP]
- Code=6691_B3-D3_20100324_VA20C00_FD50.BIN
之前一直都用这个INI正常量产，量产完成后容量都是显示4000MB以上的。直到今天量产的时候因为软件卡死了，重启电脑后再次量产容量就只有2855MB了，Bad Block也变为了360个，记得以前 Bad Block只有10多个的。很郁闷。。
在论坛里搜索了很多办法，也自己尝试过很多参数，比如说EraseAllFirst=1之类的参数都试过了，但是不管再怎么尝试容量也都是2588MB。希望各位大大来看一下，有什么办法能恢复之前的容量？还是说我的U盘真的已经是有坏块了？
附上我现在量产后容量不足的Report和Card Info，可以看出多了很多Bad Block。。Report:- Device 1:0xB3
- MP Version:2.178
- INI_File_Name:TIGER.INI
- Random delay 0 msec
- --- Download MP ISP ---
- CE-0, Flash ID=98-D5-98-B2-76-54-0B-04
- CE-1, Flash ID=98-D5-98-B2-76-54-0B-04
- Found BACKUP Table (00000159-0001)
- Defect Table (00000800-0008)
- Original Bad Block - 0:0x0002
- Original Bad Block - 0:0x0003
- Original Bad Block - 0:0x0006
- Original Bad Block - 0:0x0007
- Original Bad Block - 0:0x000A
- Original Bad Block - 0:0x000B
- 期间省略...
- Original Bad Block - 1:0x017E
- Original Bad Block - 1:0x0338
- Original Bad Block - 1:0x0339
- Original Bad Block - 1:0x03CC
- Original Bad Block - 1:0x0411
- Original Bad Block - 1:0x04B6
- Defect Table shows 2448 Good blocks, 360 Bad blocks
- SafeErase (0,1404)
- Erase failed Block - 0:0:0x0002
- Erase failed Block - 0:0:0x0003
- Erase failed Block - 0:0:0x0006
- Erase failed Block - 0:0:0x0007
- Erase failed Block - 0:0:0x000A
- Erase failed Block - 0:0:0x000B
- 期间省略...
- Erase failed Block - 0:0:0x049B
- Erase failed Block - 0:0:0x049C
- Erase failed Block - 0:0:0x049D
- Erase failed Block - 0:0:0x049E
- Erase failed Block - 0:0:0x049F
- Erase failed Block - 0:0:0x04AD
- ---> Max Bad of Plane (154,199)
- SafeErase (1,1404)
- Erase failed Block - 1:0:0x017C
- Erase failed Block - 1:0:0x017E
- Erase failed Block - 1:0:0x0338
- Erase failed Block - 1:0:0x0339
- Erase failed Block - 1:0:0x03CC
- Erase failed Block - 1:0:0x0411
- Erase failed Block - 1:0:0x04B6
- ---> Max Bad of Plane (5,2)
- ---> Max BAD/DIE = 199
- Total good blocks after SCAN: 2448 / 2808, Bad block=360
- ==> 2-Plane mode
- Adjust Max LBA = 7222272, 5849024
- MaxWindows=2/952, MaxLBA=5849024, Size=2855 MB
- Max BAD of one plane is 199 (201),2808,1,2
- RootSector=0xB87,Sec/Cluster=32, SuperPage=32 ---> Alignment=25
- Boot Block=0x0001,0x0004
- Lun0(5849024), Lun1(0), Public=5849024, Secure=0, CDROM=0
- Special FE Config = 54-0B-00
- Defect Table Block=0x0008
- --- Download ISP Code:D:\SOFTWARE\TIGER\ISP_CODE\6691_B3-D3_20100324_VA20C00_FD50.BIN---
- --- ISP Code installed.
- Lun0(5849024), Lun1(0), Public=5849024, Secure=0, CDROM=0
- Public,Secure,CDROM = 5849024,0,0
- SN=E091535C35FEFD2056610000
- === Preformat Done ===
- Low Level Format DONE
- Store INI/ERROR MSG to Block-0x0001:119.
- LBATest 10M activate
- Total=5849024,CDROM=0, PublicArea=5848896, SecureArea=0
- Create SECURE(CDROM=0,Public=2855 MB,Secure=0 MB)
- --- T2 start ---
- FW version is: 0xB3
- Vendor ID is:0x0951
- Product ID is:0x1624
- Vendor=TIGER
- Product=TIGER
- Device capacity : 0 > 29245 > 0
- DOS Volume=老虎﹏
- Device is formatted.
- --- T2 is done ---
- Total Capacity: 5849024 sectors, 2855 MBytes
- Elasped Time = 00:00:16
- ---------------- Device 1------------------
- MP Tool Version : V2.178
- INI File Name : TIGER.INI
- Format Date : 2013-02-05 22:18:43
- Flash Part No : Toshiba 43nm D3 MLC
- CE-0, Flash ID=98-D5-98-B2-76-54-0B
- CE-1, Flash ID=98-D5-98-B2-76-54-0B
- VID : 0x0951
- PID : 0x1624
- Vendor Name = TIGER
- Product Name = TIGER
- Serial Number = E091535C35FEFD2056610000
- Volume Label = 老虎﹏
- F/W Version : 0xB3
- ISP Version : VA2.0C00
- Flash R/W Timing : 25ns
- Channel : Byte Mode
- Homogeneous Mode : On
- HID Function : Disable
- Planes(F/W) : 2
- Pages/Block : 192 pages
- Max Current : 100 mA
- Total Blocks : 2808
- Bad Blocks : 360
- Capacity : 5845408 Sectors, 2992848896 Bytes
- 2922704 KBytes, 2854.20 MBytes, 2.79 GBytes
|
