切换到宽版
  • 2127阅读
  • 10回复

大出血!!!<烽火FH-AP2400-20AN纯AP刷Openwrt>后出现代码 [复制链接]

上一主题 下一主题
离线wgff151
 

发帖
6154
M币
9848
专家
32
粉丝
432
大出血!!!<烽火FH-AP2400-20AN纯AP刷Openwrt>后出现代码求救

从朋友那捡到2个FH-AP2400-20AN机器,看到是AR7161的CPU就想到了刷机,与是按坛友的教程帖子

烽火FH-AP2400-20AN纯AP刷Openwrt改双千网口无线路由


拿回来就上机刷了,其中一个机器正常,另一个机器刷了好多次,就是有问题出现.
我需要用的是模式: Client 客户端模式,也就是把它当做无线网卡使用,设置就不用说了,(混了这么长时间的坛子,也学会不少东西)模式: Client无线正常获取IP地址,就是一开网页就出现重启现象.连接上TTL线后使用SSCOM3.2看问题出在哪里,为什么会重启.
找到了好多代码,知道自己没那个能力,也不知道从哪里下手,请高手看下代码是什么意思,讲解下是什么问题,如何解决???



AR7161 CPU 680MHz, DDR 340MHz, AHB 170MHz
+Ethernet eth1: MAC address bb:aa:aa:aa:aa:bb
IP: 192.168.1.2/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.1

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version UNKNOWN - built 10:58:18, May  6 2011

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: JA76PF2HX
RAM: 0x80000000-0x83ff0000, [0x80050b50-0x83fd1000] available
FLASH: 0xbf000000 - 0xbfff0000, 256 blocks of 0x00010000 bytes each.
== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot> fis load -l linux
Image loaded from 0x80060000-0x803ab1bc
RedBoot> exec -c "board=JA76PF2"
Now booting linux kernel:
Base address 0x80050000 Entry 0x80060000
Cmdline : board=JA76PF2
[    0.000000] Linux version 3.18.36 (root@jason-virtual-machine) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49404) ) #1 Sat Feb 4 06:15:23 CST 2017
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7161 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=JA76PF console=ttyS0,115200 ethaddr=bb.aa.aa.aa.aa.bb rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=000180c2
[    0.000000] Readback ErrCtl register=000180c2
[    0.000000] Memory: 60944K/65536K available (2494K kernel code, 129K rwdata, 532K rodata, 228K init, 188K bss, 4592K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
[    0.000000] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] NET: Registered protocol family 16
[    0.080000] MIPS: machine is jjPlus JA76PF
[    2.710000] registering PCI controller with io_map_base unset
[    2.720000] i2c-gpio i2c-gpio.0: using pins 1 (SDA) and 0 (SCL)
[    2.720000] PCI host bridge to bus 0000:00
[    2.730000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ffffff]
[    2.730000] pci_bus 0000:00: root bus resource [io  0x0000]
[    2.740000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.740000] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
[    2.750000] pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
[    2.750000] pci 0000:00:11.0: using irq 40 for pin 1
[    2.760000] pci 0000:00:12.0: using irq 41 for pin 1
[    2.760000] Switched to clocksource MIPS
[    2.770000] NET: Registered protocol family 2
[    2.770000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    2.770000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    2.780000] TCP: Hash tables configured (established 1024 bind 1024)
[    2.780000] TCP: reno registered
[    2.790000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    2.790000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    2.800000] NET: Registered protocol family 1
[    2.810000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    2.820000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.820000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.830000] msgmni has been set to 119
[    2.850000] io scheduler noop registered
[    2.850000] io scheduler deadline registered (default)
[    2.860000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    2.860000] console [ttyS0] disabled
[    2.890000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 10625000) is a 16550A
[    2.900000] console [ttyS0] enabled
[    2.900000] console [ttyS0] enabled
[    2.900000] bootconsole [early0] disabled
[    2.900000] bootconsole [early0] disabled
[    2.910000] m25p80 spi0.0: found w25q128, expected m25p80
[    2.920000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    2.920000] Searching for RedBoot partition table in spi0.0 at offset 0xfe0000
[    2.960000] 5 RedBoot partitions found on MTD device spi0.0
[    2.970000] Creating 5 MTD partitions on "spi0.0":
[    2.970000] 0x000000000000-0x000000040000 : "RedBoot"
[    2.980000] 0x000000040000-0x000000160000 : "linux"
[    2.980000] 0x000000160000-0x000000fe0000 : "rootfs"
[    2.990000] mtd: device 2 (rootfs) set to be root filesystem
[    3.000000] 1 squashfs-split partitions found on MTD device rootfs
[    3.000000] 0x000000740000-0x000000fe0000 : "rootfs_data"
[    3.010000] 0x000000fe0000-0x000000fef000 : "FIS directory"
[    3.010000] 0x000000fef000-0x000000ff0000 : "RedBoot config"
[    3.030000] switch0: Atheros AR8316 rev. 1 switch registered on ag71xx-mdio.0
[    3.040000] libphy: ag71xx_mdio: probed
[    3.360000] ar8316: Using port 4 as PHY
[    4.400000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316]
[    4.410000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:RGMII
[    4.730000] ar8316: Using port 4 as PHY
[    4.730000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316]
[    4.740000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    4.750000] TCP: cubic registered
[    4.760000] NET: Registered protocol family 17
[    4.760000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    4.770000] 8021q: 802.1Q VLAN Support v1.8
[    4.780000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    4.790000] Freeing unused kernel memory: 228K (80377000 - 803b0000)
[    5.800000] init: Console is alive
[    5.800000] init: - watchdog -
[    7.180000] usbcore: registered new interface driver usbfs
[    7.190000] usbcore: registered new interface driver hub
[    7.200000] usbcore: registered new device driver usb
[    7.200000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.210000] ehci-platform: EHCI generic platform driver
[    7.220000] ehci-platform ehci-platform: EHCI Host Controller
[    7.220000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    7.230000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    7.260000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    7.260000] hub 1-0:1.0: USB hub found
[    7.270000] hub 1-0:1.0: 2 ports detected
[    7.270000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.280000] ohci-platform: OHCI generic platform driver
[    7.280000] ohci-platform ohci-platform: Generic Platform OHCI controller
[    7.290000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
[    7.300000] ohci-platform ohci-platform: irq 14, io mem 0x1c000000
[    7.370000] hub 2-0:1.0: USB hub found
[    7.370000] hub 2-0:1.0: 2 ports detected
[    7.810000] init: - preinit -
[    8.200000] random: procd urandom read with 12 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[   11.460000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   11.480000] mount_root: switching to jffs2 overlay
[   11.510000] procd: - early -
[   11.520000] procd: - watchdog -
[   12.120000] procd: - ubus -
[   13.140000] procd: - init -
Please press Enter to activate this console.
[   13.900000] tun: Universal TUN/TAP device driver, 1.6
[   13.910000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   13.910000] Netfilter messages via NETLINK v0.30.
[   13.920000] ip_set: protocol 6
[   13.960000] u32 classifier
[   13.960000]     input device check on
[   13.970000]     Actions configured
[   13.970000] Mirror/redirect action on
[   14.010000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   14.020000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   14.030000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.050000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
[   14.140000] xt_time: kernel timezone is -0000
[   14.210000] PPP generic driver version 2.4.2
[   14.220000] NET: Registered protocol family 24
[   14.260000] PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
[   15.840000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   15.870000] PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
[   17.450000] ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0010000, irq=41
[   24.770000] device eth0 entered promiscuous mode
[   24.780000] device eth1 entered promiscuous mode
[   24.780000] br-lan: port 2(eth1) entered forwarding state
[   24.790000] br-lan: port 2(eth1) entered forwarding state
[   25.550000] ar71xx: pll_reg 0xb8050014: 0x1099
[   25.550000] eth0: link up (100Mbps/Full duplex)
[   25.580000] br-lan: port 1(eth0) entered forwarding state
[   25.580000] br-lan: port 1(eth0) entered forwarding state
[   25.760000] br-lan: port 2(eth1) entered disabled state
[   26.580000] ar71xx: pll_reg 0xb8050010: 0x110000
[   26.580000] eth1: link up (1000Mbps/Full duplex)
[   26.580000] br-lan: port 2(eth1) entered forwarding state
[   26.590000] br-lan: port 2(eth1) entered forwarding state
[   27.390000] wlan0: authenticate with 00:15:61:11:d4:5c
[   27.410000] wlan0: send auth to 00:15:61:11:d4:5c (try 1/3)
[   27.410000] wlan0: authenticated
[   27.430000] wlan0: associate with 00:15:61:11:d4:5c (try 1/3)
[   27.430000] wlan0: RX AssocResp from 00:15:61:11:d4:5c (capab=0x431 status=0 aid=4)
[   27.440000] wlan0: associated
[   27.580000] br-lan: port 1(eth0) entered forwarding state
[   28.590000] br-lan: port 2(eth1) entered forwarding state
[   66.180000] random: nonblocking pool is initialized


以为是Use builtin IPv6的问题,所以把OP的还有IPv6的安装文件全部给移除了.
以上黑字启动信息,以下红字部分是错误的开始,不知道代码是什么意思,怎么解决?

[   90.050000] Data bus error, epc == 833614ac, ra == 833614a8
[   90.050000] Oops[#1]:
[   90.050000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.36 #1
[   90.050000] task: 8035ead0 ti: 80358000 task.ti: 80358000
[   90.050000] $ 0   : 00000000 803b0000 deadc0de 00004028
[   90.050000] $ 4   : b0004048 b0000000 00000002 00000002
[   90.050000] $ 8   : 00000380 ffffffff 00000001 00000000
[   90.050000] $12   : 00000014 00000001 00000000 f69bb368
[   90.050000] $16   : fffffffd 00004048 8319d3e0 00000002
[   90.050000] $20   : 803d5698 803d5898 00000200 00000001
[   90.050000] $24   : 00000000 83361470                  
[   90.050000] $28   : 80358000 80359cd8 00000004 833614a8
[   90.050000] Hi    : 00000014
[   90.050000] Lo    : f765f480
[   90.050000] epc   : 833614ac ath_start_rfkill_poll+0x2e8/0x414 [ath9k]
[   90.050000]     Not tainted
[   90.050000] ra    : 833614a8 ath_start_rfkill_poll+0x2e4/0x414 [ath9k]
[   90.050000] Status: 1000fc03    KERNEL EXL IE
[   90.050000] Cause : 1080001c
[   90.050000] PrId  : 00019374 (MIPS 24Kc)
[   90.050000] Modules linked in: ath9k ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_string xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY ts_kmp ts_fsm ts_bm slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat sch_teql sch_tbf sch_sfq sch_red sch_prio sch_pie sch_htb sch_gred sch_fq sch_dsmark sch_codel em_text em_nbyte em_meta em_cmp cls_basic act_police act_ipt act_skbedit act_mirred em_u32 cls_u32 cls_tcindex cls_flow cls_route cls_fw sch_hfsc sch_ingress ledtrig_usbdev xt_set x_tables ip_set_list_set ip_set_hash_netiface ip_set_hash_netport ip_set_hash_netnet ip_set_hash_net ip_set_hash_netportnet ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink tun nls_utf8 arc4 crypto_blkcipher ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[   90.050000] Process swapper (pid: 0, threadinfo=80358000, task=8035ead0, tls=00000000)
[   90.050000] Stack : 00000004 83362be0 83900000 80099548 80360000 8319d3e0 83196310 00000000
      803d5498 83360dbc 83815a00 839a6e14 00000000 80090ec0 83196310 00000000
      000000a7 80218904 00000014 00000014 00000100 80360000 00000100 80360000
      80218840 800ab19c 80060000 80368de4 80360000 00000000 00000007 00000001
      803d4c80 80360000 80359d78 800ab9e0 8030a6d8 800a5134 8035d178 8035d178
      ...
[   90.050000] Call Trace:
[   90.050000] [<833614ac>] ath_start_rfkill_poll+0x2e8/0x414 [ath9k]
[   90.050000] [<833614a8>] ath_start_rfkill_poll+0x2e4/0x414 [ath9k]
[   90.050000]
[   90.050000]
Code: 0c06b8ef  00852021  8e4509bc <00501024> 00538025  02002021  0c06b8f5  00b12821  8fbf0024
[   90.330000] ---[ end trace fe17116b4083b580 ]---
[   90.340000] Kernel panic - not syncing: Fatal exception in interrupt
[   90.340000] Rebooting in 3 seconds..
恳请高手指点为盼
恳请高手指点为盼
恳请高手指点为盼

找别人的毛病不如自己动手做点东西.
离线小茅

发帖
2260
M币
1579
专家
6
粉丝
34
只看该作者 1楼 发表于: 02-08
data bus error = 数据总线错误,是不是内存开焊了
本帖最近打赏记录:共1条打赏M币+15
数码之家终于回归正常的论坛模式了
离线王树临风

发帖
1489
M币
1184
专家
1
粉丝
29
只看该作者 2楼 发表于: 02-08
竟然被@了,,泻药。谢邀。

我啥都不会,都是按隔壁论坛教程刷不死,然后不死下面刷固件,反正不死了,随便刷呗,固件不好用就换一个。刷坏了就拆F用编程器刷不死。


原来我也爱折腾,现在都是忍住不折腾,也没那闲工夫瞎搞了。
路由器能上网就行,不行就刷,刷不好买新的。

修旧不如买新。
本帖最近打赏记录:共1条打赏M币+15
离线kujy

发帖
4657
M币
3216
专家
1
粉丝
36
只看该作者 3楼 发表于: 02-08
估计硬件故障啊,刷回原厂固件能用不?
本帖最近打赏记录:共1条打赏M币+15
天道下济而光明 地道卑而上行
离线wgff151

发帖
6154
M币
9848
专家
32
粉丝
432
只看该作者 4楼 发表于: 02-11
歡迎探討 原装机器没有更换过内存,这个机率很小,请再帮忙查看下
离线wgff151

发帖
6154
M币
9848
专家
32
粉丝
432
只看该作者 5楼 发表于: 02-11
歡迎探討 这机器我试刷不死进不去固件,网上如果有其它刷机方法就不会用这种办法
离线wgff151

发帖
6154
M币
9848
专家
32
粉丝
432
只看该作者 6楼 发表于: 02-11
歡迎探討 原厂固件那真是一个垃圾,只能进瘦AP,一转胖子就死机
离线王树临风

发帖
1489
M币
1184
专家
1
粉丝
29
只看该作者 7楼 发表于: 02-13
回 wgff151 的帖子
wgff151:歡迎探討 这机器我试刷不死进不去固件,网上如果有其它刷机方法就不会用这种办法 (2018-02-11 09:27) 回 wgff151 的帖子

刷回原厂,挂咸鱼出了吧
本帖最近打赏记录:共1条打赏M币+5
离线bboroo

发帖
3837
M币
1914
专家
3
粉丝
46
只看该作者 8楼 发表于: 02-15
回 wgff151 的帖子
wgff151:歡迎探討 原厂固件那真是一个垃圾,只能进瘦AP,一转胖子就死机 (2018-02-11 09:30) 回 wgff151 的帖子

设为胖AP模式会死机应该是硬件问题了。
本帖最近打赏记录:共1条打赏M币+9
离线wgff151

发帖
6154
M币
9848
专家
32
粉丝
432
只看该作者 9楼 发表于: 02-16
新春快乐!狗年吉祥  明天把内存换下看看