查看完整版本: [-- 求救下,帮看看开卡的问题出在哪边。 --]

数码之家 -> SSD存储技术 -> 求救下,帮看看开卡的问题出在哪边。 [打印本页] 登录 -> 注册 -> 回复主题 -> 发表主题

ddk2001 2014-09-28 09:08
赞助商链接

开卡失败,焊接放大镜检查过了,没有虚焊  没有短路.SF2281的主控,用的是29f64g08cbaaawp的F,准备先焊4片开个32G的试试看的。一直失败中。配置中,电源保护开了,温度选项选择的TM75的。

下面是开卡的log

Starting command:[/root/soft/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 2:0:0:0 "/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp" "/root/mpt/22454.123456.driveconfig" 2281 2281  LOG="/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/2281_ddk_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log"   ]...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit

Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 09/28/2014 08:46:05] - SF_Genesis has been invoked with the following parameters:

                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      argv[1]: -PROCESS_SSD
                      argv[2]: 2:0:0:0
                      argv[3]: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
                      argv[4]: /root/mpt/22454.123456.driveconfig
                      argv[5]: 2281
                      argv[6]: 2281
                      argv[7]: LOG=/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/2281_ddk_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Sun 09/28/2014 08:46:05] - Instructing the operating system to purge any existing cached data for device: '2:0:0:0'
[Sun 09/28/2014 08:46:10] - Issuing a discovery command for device: '2:0:0:0'
[Sun 09/28/2014 08:46:16] - Discovery command completed...
[Sun 09/28/2014 08:46:16] - Waiting 5 seconds for the system to settle...
[Sun 09/28/2014 08:46:21] - Device designation string '2:0:0:0' is mapped to node '/dev/sg2'
[Sun 09/28/2014 08:46:21] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              DeviceName = /dev/sg2
    MFP Package Filename = /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
      Configuration File = /root/mpt/22454.123456.driveconfig
              Serial No. = 2281
         World Wide Name = 2281
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Sun 09/28/2014 08:46:21] - Successfully received the IDENTIFY data from the drive...
[Sun 09/28/2014 08:46:21] - Validating Manufacturing Firmware Package: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
[Sun 09/28/2014 08:46:29] - Successfully opened the package: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
[Sun 09/28/2014 08:46:29] - file  /root/mpt/22454.123456.driveconfig Loaded successfully
[Sun 09/28/2014 08:46:29] - Warning:  Unable to query diagnostics information to perform power management settings check
[Sun 09/28/2014 08:46:29] - B01 Power Management configuration request detected
[Sun 09/28/2014 08:46:29] - Successfully extracted *.DriveConfig file: /root/mpt/22454.123456.driveconfig
[Sun 09/28/2014 08:46:29] - Extracted Config_ID: 1 (22454) in DriveConfig file: /root/mpt/22454.123456.driveconfig
[Sun 09/28/2014 08:46:29] - Extracted SerialOutputControl: 0
[Sun 09/28/2014 08:46:29] - Searching for flashware image for configuration 22454
[Sun 09/28/2014 08:46:29] - Manifest found for configuration 22454
[Sun 09/28/2014 08:46:29] - Flashware image extracted: 22454_fw_cl_mlc_Micron_64Gb_MT29F64G08CBAAAWP_1Q_1C_1D_PP_R00819_s512.vic
[Sun 09/28/2014 08:46:29] - Searching for manufacturing image for configuration 22454
[Sun 09/28/2014 08:46:29] - Manifest found for configuration 22454
[Sun 09/28/2014 08:46:29] - Manufacturing image extracted: 22454_mf_mlc_Micron_64Gb_MT29F64G08CBAAAWP_1Q_1C_1D_PP_R00819_s512.vic
[Sun 09/28/2014 08:46:29] - Proceeding in ROM mode, download feature 3...
[Sun 09/28/2014 08:47:35] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          ATA COMMAND : 0x0092  (146)
          ATA FEATURE : 0x0003  (3)
         Device Status: 0x0001  (1)
         Driver Status: 0x0000  (0)
           Host Status: 0x0008  (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
  0 -         No Sense: 114 (0x72)    OK
  1 -  Recovered Error:  11 (0x0B)    FAIL
  2 -        Not Ready:   0 (0x00)    OK
  3 -     Medium Error:   0 (0x00)    OK
  4 -   Hardware Error:   0 (0x00)    OK
  5 -  Illegal Request:   0 (0x00)    OK
  6 -   Unit Attention:   0 (0x00)    OK
  7 -     Data Protect:  14 (0x0E)    OK
  8 -      Blank Check:   9 (0x09)    OK
  9 -  Vendor Specific:  12 (0x0C)    OK
10 -     Copy Aborted:   0 (0x00)    OK
11 -  Aborted Command:   0 (0x00)    OK
12 - Equal Comparison:   0 (0x00)    NA
13 -  Volume Overflow:   0 (0x00)    NA
14 -       Miscompare:   0 (0x00)    OK
15 -         Reserved: 128 (0x80)    NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~

[  174.460470] ata3.00: failed command: STANDBY IMMEDIATE
[  174.460474] ata3.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  174.460475]          res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[  174.460477] ata3.00: status: { DRDY ERR }
[  174.460479] ata3.00: error: { ABRT }
[  174.460485] ata3.00: device reported invalid CHS sector 0
[  174.460495] sd 2:0:0:0: [sdc] START_STOP FAILED
[  174.460497] sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  174.460500] sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
[  174.460503] sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
[  174.460527] ata3.00: disabled
[  179.462687] ata3: hard resetting link
[  179.918050] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  179.918261] ata3.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[  179.918264] ata3.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
[  179.921244] ata3.00: configured for UDMA/133
[  179.921249] ata3: EH complete
[  179.921323] scsi 2:0:0:0: Direct-Access     ATA      SandForce{200026 20DA PQ: 0 ANSI: 5
[  179.923781] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  179.924822] sd 2:0:0:0: [sdc] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[  179.924824] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[  179.924866] sd 2:0:0:0: [sdc] Write Protect is off
[  179.924868] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[  179.924887] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  179.925490]  sdc: unknown partition table
[  179.931693] sd 2:0:0:0: [sdc] Attached SCSI disk
[  203.712150] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  203.712154] ata3.00: failed command: DOWNLOAD MICROCODE
[  203.712159] ata3.00: cmd 92/03:66:00:80:01/00:00:00:00:00/00 tag 0 pio 52224 out
[  203.712160]          res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[  203.712162] ata3.00: status: { DRDY }
[  203.712169] ata3: hard resetting link
[  209.217015] ata3: link is slow to respond, please be patient (ready=0)
[  213.756014] ata3: SRST failed (errno=-16)
[  213.756023] ata3: hard resetting link
[  219.261014] ata3: link is slow to respond, please be patient (ready=0)
[  223.800011] ata3: SRST failed (errno=-16)
[  223.800020] ata3: hard resetting link
[  229.305012] ata3: link is slow to respond, please be patient (ready=0)
[  258.834012] ata3: SRST failed (errno=-16)
[  258.834021] ata3: limiting SATA link speed to 1.5 Gbps
[  258.834028] ata3: hard resetting link
[  263.880013] ata3: SRST failed (errno=-16)
[  263.880018] ata3: reset failed, giving up
[  263.880021] ata3.00: disabled
[  263.880039] ata3: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Sun 09/28/2014 08:47:35] - End of Genesis manufacturing log.
[Sun 09/28/2014 08:47:35] - Exiting...
[Sun 09/28/2014 08:47:35] - Overall Result for Device: /dev/sg2 ****** FAIL ******


Process exited with code 20



[attachment=4697650]


qas999 2014-09-28 10:06
赞助商链接

这个是intel 板子吧默认是toggle跳线? 跳线改对了么?

ddk2001 2014-09-28 10:26
赞助商链接

qas999:这个是intel 板子吧默认是toggle跳线? 跳线改对了么? (2014-09-28 10:06) 

这个闪存应该不需要toggle跳线吧

emmod 2014-09-28 11:45
我只看到了那包中华。。。
话说看起来是SATA连接故障。。。

ddk2001 2014-09-28 12:03
emmod:[图片]我只看到了那包中华。。。
话说看起来是SATA连接故障。。。
 (2014-09-28 11:45) 

-。-  没注意拍到烟了,开机的时候显示了3th mastor hard disk error。是连接线的问题吗。能够认盘。

emmod 2014-09-28 12:19
你主板的AHCI支持是原生的还是兼容的?

nfy123 2014-09-28 12:35
跳线~写保护~都先确认下~在开卡~ 20多数是焊接的问题貌似~

qas999 2014-09-28 12:43
就是不需要toggle跳线 所以你需要改成ONFI异步跳线啊……

ddk2001 2014-09-28 13:00
qas999:就是不需要toggle跳线 所以你需要改成ONFI异步跳线啊…… (2014-09-28 12:43) 

跳线短接的2个点。

ddk2001 2014-09-28 13:04
nfy123:跳线~写保护~都先确认下~在开卡~ 20多数是焊接的问题貌似~ (2014-09-28 12:35) 

我再检查焊接看看。20能不能具体的看出是虚焊或者是短路

ddk2001 2014-09-28 13:05
qas999:就是不需要toggle跳线 所以你需要改成ONFI异步跳线啊…… (2014-09-28 12:43) 

请教下ONFI异步跳线是如何跳的。

剧毒 2014-09-28 14:38
目测主控挂了   加焊就好

剧毒 2014-09-28 14:39
修好了中华送我吧

ddk2001 2014-09-28 14:49
剧毒:修好了中华送我吧[表情]  (2014-09-28 14:39) 

加我Q吧,我U你5212698

nfy123 2014-09-28 16:41
毒大神来了。

sclwindows 2014-09-28 16:46
我也遇到过相同的问题 还在那没辙呢

huangxunjie 2014-10-08 08:57
我你同命相连啊,一样是20错误,我也补焊了好几次了,放大镜不断检查,没发现虚焊情况啊
我也上logo,从错误开始:

Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 498.785154] sd 1:0:0:0: [sdb]
[ 498.785156] Sense Key : Aborted Command [current] [descriptor]
[ 498.785159] sd 1:0:0:0: [sdb]
[ 498.785161] Add. Sense: No additional sense information
[ 498.785384] ata2.00: disabled
[ 503.788123] ata2: hard resetting link
[ 504.092746] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 504.092908] ACPI Error: [DSSP] Namespace lookup failure,AE_NOT_FOUND (20130517/psargs-359)
[ 504.092914] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF](Node f3443450), AE_NOT_FOUND (20130517/psparse-536)
[ 504.093752] ata2.00: ATA-8: SandForce{200026BB}, 20DABBR0, maxUDMA/133
[ 504.093756] ata2.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32),AA
[ 504.097295] ACPI Error: [DSSP] Namespace lookup failure,AE_NOT_FOUND (20130517/psargs-359)
[ 504.097301] ACPI Error: Method parse/execution failed[\_SB_.PCI0.SAT0.SPT1._GTF] (Node f3443450), AE_NOT_FOUND(20130517/psparse-536)
[ 504.099438] ata2.00: configured for UDMA/133
[ 504.099446] ata2: EH complete
[ 504.099538] scsi 1:0:0:0: Direct-Access ATA SandForce{200026 20DAPQ: 0 ANSI: 5
[ 504.099709] sd 1:0:0:0: [sdb] 64 512-byte logical blocks: (32.7kB/32.0 KiB)
[ 504.099712] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 504.099758] sd 1:0:0:0: [sdb] Write Protect is off
[ 504.099761] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 504.099782] sd 1:0:0:0: [sdb] Write cache: disabled, read cache:enabled, doesn't support DPO or FUA
[ 504.101709] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 504.111187] sdb: unknown partition table
[ 504.111421] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 521.995325] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action0x6 frozen
[ 521.995331] ata2.00: failed command: DOWNLOAD MICROCODE
[ 521.995338] ata2.00: cmd 92/03:69:00:80:01/00:00:00:00:00/00 tag 0pio 53760 out
res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 521.995349] ata2.00: status: { DRDY }
[ 521.995353] ata2: hard resetting link
[ 527.349137] ata2: link is slow to respond, please be patient(ready=0)
[ 532.041032] ata2: COMRESET failed (errno=-16)
[ 532.041039] ata2: hard resetting link
[ 537.394881] ata2: link is slow to respond, please be patient(ready=0)
[ 542.086759] ata2: COMRESET failed (errno=-16)
[ 542.086766] ata2: hard resetting link
[ 547.440624] ata2: link is slow to respond, please be patient(ready=0)
[ 577.121843] ata2: COMRESET failed (errno=-16)
[ 577.121850] ata2: limiting SATA link speed to 1.5 Gbps
[ 577.121852] ata2: hard resetting link
[ 582.169714] ata2: COMRESET failed (errno=-16)
[ 582.169721] ata2: reset failed, giving up
[ 582.169723] ata2.00: disabled
[ 582.169740] ata2: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 10/08/2014 10:14:31] - End of Genesis manufacturing log.
[Wed 10/08/2014 10:14:31] - Exiting...
[Wed 10/08/2014 10:14:31] - Overall Result for Device: /dev/sg1****** FAIL ******Process exited with code 20



剧毒 2014-10-09 15:35
貌似  我看不懂得说。。


查看完整版本: [-- 求救下,帮看看开卡的问题出在哪边。 --] [-- top --]



Powered by phpwind v8.7 Code ©2003-2011 phpwind
Time 0.110933 second(s),query:5 Gzip enabled