Kingston DT101 G2 4G,刚买的新U盘啊 o(╯□╰)o
第一张是量产前的识别信息:
U盘拆开确认是SSS6692的芯片
量产失败之后系统识别为0字节,那会用的还不是2.182
之后用2.182量产显示Error3,然后ForceID量产,出现下图,Error8
Report:
Device 1:0xB5
MP Version:2.182
INI_File_Name:6692_HY32_256P_8KB.INI
Random delay 0 msec
--- Download MP ISP ---
Auto CE: 0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
CE-0, Flash ID=AD-D7-94-9A-74-42-AD-D7
Page/Block=256
Searching SORTING BOARD table ...
--> Not Found
Scan (0,2048)
Original Defect Block - 0:0:0x0006
Original Defect Block - 0:0:0x0010
Original Defect Block - 0:0:0x010B
Original Defect Block - 0:0:0x0115
---> Max Bad of Plane (3,3)
---> Max BAD/DIE = 3
Total good blocks after SCAN: 2044 / 2048, Bad block=4
==> 2-Plane mode
Max. Bad Block Allowed = 82(4)
Adjust Max LBA = 7823360, 7823296
MaxWindows=1/1910, MaxLBA=7823296, Size=3819 MB
Max BAD of one plane is 3 (41),2048,1,1
RootSector=0x73F,Sec/Cluster=64, SuperPage=64 ---> Alignment=1
Boot Block=0x0002,0x0004
Lun0(7207972), Lun1(615324), Public=7207972, Secure=0, CDROM=615324
Special FE Config = 56-0B-00
Defect Table Block=0x000A
--- Download ISP Code:C:\6692_HY32_MP_V2182\ISP_CODE\6692_B5-IM_20110114_VB80000_51F5.BIN---
--- ISP Code installed.
Lun0(7207972), Lun1(615324), Public=7207972, Secure=0, CDROM=615324
Public,Secure,CDROM = 7207972,0,615324
PHY: E2/E4/E6=72h/36h/04h, D0/C0/CFG10=DFh/0Bh/87h
SN=F4EC3804BFFFFB91B6032049
=== Preformat Done ===
Low Level Format DONE
Store INI/ERROR MSG to Block-0x0002:78.
### Error: Device capacity is 0 bytes
求奇迹: QQ 307136712
