求助：量产失败，错误代码附后，不知错误如何修改，谢谢。
Device 1:0xB5
MP Version:2.182
INI_File_Name:6692_HY32_256P_8KB.INI
Random delay 0 msec
--- Download MP ISP ---
Auto CE: 0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
CE-0, Flash ID=AD-D7-94-9A-74-42-AD-D7
Page/Block=256
Searching SORTING BOARD table ...
--> Not Found
Found BACKUP Table (0000023A-0002)
Defect Table (00000800-0008)
Defect Table shows 2048 Good blocks, 0 Bad blocks
SafeErase (0,2048)
---> Max Bad of Plane (1,1)
---> Max BAD/DIE = 1
Total good blocks after SCAN: 2048 / 2048, Bad block=0
==> 2-Plane mode
Max. Bad Block Allowed = 82(0)
Adjust Max LBA = 7823360, 7823296
MaxWindows=1/1910, MaxLBA=7823296, Size=3819 MB
Max BAD of one plane is 1 (41),2048,1,1
RootSector=0x7D5,Sec/Cluster=64, SuperPage=64 ---> Alignment=43
Boot Block=0x0002,0x0004
Lun0(7823296), Lun1(0), Public=7823296, Secure=0, CDROM=0
Special FE Config = 54-0B-00
Defect Table Block=0x0008
--- Download ISP Code:E:\量产2011-10-09\6692_HY32_MP_V2182\ISP_CODE\6692_B5-IM_20110114_VB80000_51F5.BIN---
--- ISP Code installed.
Lun0(7823296), Lun1(0), Public=7823296, Secure=0, CDROM=0
Public,Secure,CDROM = 7823296,0,0
PHY: E2/E4/E6=72h/36h/04h, D0/C0/CFG10=DFh/0Bh/87h
SN=001C25DBCE40FBA09865202C
=== Preformat Done ===
Low Level Format DONE
Store INI/ERROR MSG to Block-0x0002:78.
LBATest 10M activate
### Error: CopyTest Fail(Write LBA=0x000013C0)
### Error: CopyTest Fail(BLANK LBA=0x00000000)
### CopyTest 10M fail ###
Device 2:0xB5
MP Version:2.182
INI_File_Name:6692_HY32_256P_8KB.INI
Random delay 700 msec
--- Download MP ISP ---
Auto CE: 0x00 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF 0xFF
CE-0, Flash ID=AD-D7-94-9A-74-42-AD-D7
Page/Block=256
Searching SORTING BOARD table ...
--> Not Found
Found BACKUP Table (0000023A-0002)
Defect Table (00000800-0008)
Defect Table shows 2048 Good blocks, 0 Bad blocks
SafeErase (0,2048)
### Err: Scan (0,2048) fail
### Error: SafeErase() Fail ###
---------------- Device 1------------------
FW version:0xB5
CE-0, Flash ID=AD-D7-94-9A-74-42-AD
Found boot block at (0x00000200)
### Error: Read MBR
---------------- Device 2------------------
FW version:0xB5
CE-0, Flash ID=AD-D7-94-9A-74-42-AD
Found boot block at (0x00000200)
### Error: Read MBR
