板子是sf2281，颗粒为16b ccme2 *8 用5.0.7 的固件，选用的配置文件为22217 开卡时候到79%就失败。日志见后面
<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Sun, 02/08/2015 @ 22:10:24
End Time: Sun, 02/08/2015 @ 22:11:32
OverallResult: FAIL
ExitCode: (0x10090008:SF_GENESIS_FORMAT_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/FW_SF-2000_MP_5-0-7_Client.0.mfp
argv[4]: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/22217.0.driveconfig
argv[5]: 1231
argv[6]: 1231
argv[7]: LOG=/sf2281/log/1231_M_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
Log File: /sf2281/log/1231_M_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
Hostname: M
Host IP Address: 127.0.0.1
Port Number: 0
DeviceName: /dev/sg0
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 02/08/2015 22:10:24] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/FW_SF-2000_MP_5-0-7_Client.0.mfp
argv[4]: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/22217.0.driveconfig
argv[5]: 1231
argv[6]: 1231
argv[7]: LOG=/sf2281/log/1231_M_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 02/08/2015 22:10:24] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Sun 02/08/2015 22:10:29] - Issuing a discovery command for device: '0:0:0:0'
[Sun 02/08/2015 22:10:34] - Discovery command completed...
[Sun 02/08/2015 22:10:34] - Waiting 5 seconds for the system to settle...
[Sun 02/08/2015 22:10:39] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Sun 02/08/2015 22:10:39] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/FW_SF-2000_MP_5-0-7_Client.0.mfp
Configuration File = /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/22217.0.driveconfig
Serial No. = 1231
World Wide Name = 1231
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 02/08/2015 22:10:39] - Successfully received the IDENTIFY data from the drive...
[Sun 02/08/2015 22:10:39] - Validating Manufacturing Firmware Package: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/FW_SF-2000_MP_5-0-7_Client.0.mfp
[Sun 02/08/2015 22:10:43] - Successfully opened the package: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/FW_SF-2000_MP_5-0-7_Client.0.mfp
[Sun 02/08/2015 22:10:43] - file /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/22217.0.driveconfig Loaded successfully
[Sun 02/08/2015 22:10:43] - Warning: Unable to query diagnostics information to perform power management settings check
[Sun 02/08/2015 22:10:43] - B01 Power Management configuration request detected
[Sun 02/08/2015 22:10:43] - Successfully extracted *.DriveConfig file: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/22217.0.driveconfig
[Sun 02/08/2015 22:10:43] - Extracted Config_ID: 1 (22217) in DriveConfig file: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/22217.0.driveconfig
[Sun 02/08/2015 22:10:43] - Extracted SerialOutputControl: 0
[Sun 02/08/2015 22:10:43] - Searching for flashware image for configuration 22217
[Sun 02/08/2015 22:10:43] - Manifest found for configuration 22217
[Sun 02/08/2015 22:10:43] - Flashware image extracted: 22217_fw_cl_ccmlc_Intel_64Gb_JS29F16B08CCME2_2Q_2C_1D_PP_R00426_s512.vic
[Sun 02/08/2015 22:10:43] - Searching for manufacturing image for configuration 22217
[Sun 02/08/2015 22:10:43] - Manifest found for configuration 22217
[Sun 02/08/2015 22:10:43] - Manufacturing image extracted: 22217_mf_ccmlc_Intel_64Gb_JS29F16B08CCME2_2Q_2C_1D_PP_R00426_s512.vic
[Sun 02/08/2015 22:10:43] - Proceeding in ROM mode, download feature 3...
[Sun 02/08/2015 22:10:44] - Successfully downloaded MFB to the drive...
[Sun 02/08/2015 22:10:44] - Waiting (5 sec) for the drive to settle...
[Sun 02/08/2015 22:10:49] - Successfully received the IDENTIFY data from the drive...
[Sun 02/08/2015 22:10:49] - Firmware revision reported to be: '507ABBM0'. This indicates MFB download was successful.
[Sun 02/08/2015 22:10:49] - Successfully enabled SMART capabilities...
[Sun 02/08/2015 22:10:51] - Successfully issued a diagnostic unlock...
[Sun 02/08/2015 22:10:52] - Performing the flash test of block 0 (0x0000)...
[Sun 02/08/2015 22:10:53] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 2
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0022 | N3,N5 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 0 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 16
Number of failures: 0
Number of Passed with warnings: 16
No. Passed without warnings: 0
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 02/08/2015 22:10:53] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 234441648
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 34953 (0x8889)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 0
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 02/08/2015 22:11:32] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x0000C048:SF_SCT (C048h): Root Creation Failed (MFB format))
[Sun 02/08/2015 22:11:32] - End of Genesis manufacturing log.
[Sun 02/08/2015 22:11:32] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Sun, 02/08/2015 @ 22:10:24 </Start_Time>
<End_Time> Sun, 02/08/2015 @ 22:11:32 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090008:SF_GENESIS_FORMAT_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/FW_SF-2000_MP_5-0-7_Client.0.mfp
argv[4]: /sf2281/mpt/FW_SF-2000_MP_5-0-7_Client--0/22217.0.driveconfig
argv[5]: 1231
argv[6]: 1231
argv[7]: LOG=/sf2281/log/1231_M_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
</Input_Parameters>
<Log_File> /sf2281/log/1231_M_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log </Log_File>
<Hostname> M </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 0 </Port_Number>
<Device_Name> /dev/sg0 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Sun 02/08/2015 22:11:32] - Overall Result for Device: /dev/sg0 ****** FAIL ******
板子是sf2281，颗粒为16b ccme2 *8 用5.0.7 的固件，选用的配置文件为22217 开卡时候到79%就失败，求助高手指点一二。
