切换到宽版
爱科技/爱创意/爱折腾/爱极致;技术知识分享平台,点击进入新版数码之家网站
  • 6048阅读
  • 2回复

[鑫创]故障:不能格式化,3s量产错误61,量产成功 [复制链接]

上一主题 下一主题
离线dido0379
 
发帖
4
M币
21
专家
0
粉丝
2
只看楼主 倒序阅读 我要置顶 楼主  发表于: 2012-06-19

一、


Chipgenus4.0检测结果(量产后):

拆开后闪存号码:FT32G08UCT1,应该为东芝flash,
故障:不能格式化,3s量产错误61。不能取得cardinfo
解决办法:短接29,30脚插入,断开短接,打开3s 2162量产软件,选择6691,d2量产成功。
量产结果:
---------------- Device 1------------------
  MP Tool Version : V2.162
  INI File Name : Random
  Format Date : 2012-02-29 22:45:18
  Flash Part No : Toshiba 3xnm D2 MLC
  CE-0, Flash ID=98-D7-94-32-76-55-0C
  VID : 0x0C76
  PID : 0x0005
  Vendor Name = 3SYSTEM
  Product Name = USB Flash Disk  
  Serial Number = 00306730E642F221DE7914DC
  Volume Label =            
  F/W Version : 0xB3
  ISP Version : VA1.0F00
  Flash R/W Timing : 25ns
  Channel : Byte Mode
  Homogeneous Mode : On
  HID Function : Disable
  Planes(F/W) : 2
  Pages/Block : 128 pages
  Max Current : 100 mA
  Total Blocks : 4100
  Bad Blocks : 11
  Capacity : 7818112 Sectors, 4002873344 Bytes
                   3909056 KBytes, 3817.44 MBytes, 3.73 GBytes




Device 1:0xB3
       MP Version:2.162
       INI_File_Name:
       Random delay 0 msec
       --- Download MP ISP ---
       CE-0, Flash ID=98-D7-94-32-76-55-0C-00
       Found BACKUP Table (000000BB-0001)
       Defect Table (00000200-0004)
              Original Bad Block - 0:0x014B
              Original Bad Block - 0:0x014D
              Original Bad Block - 0:0x019E
              Original Bad Block - 0:0x02FB
              Original Bad Block - 0:0x02FD
              Original Bad Block - 0:0x08E6
              Original Bad Block - 0:0x0D8C
              Original Bad Block - 0:0x0D8E
              Original Bad Block - 0:0x0DB2
              Original Bad Block - 0:0x0FD5
              Original Bad Block - 0:0x0FF9
       Defect Table shows 4089 Good blocks, 11 Bad blocks
       SafeErase (0,4100)
              Erase failed Block - 0:0:0x014B
              Erase failed Block - 0:0:0x014D
              Erase failed Block - 0:0:0x019E
              Erase failed Block - 0:0:0x02FB
              Erase failed Block - 0:0:0x02FD
              Erase failed Block - 0:0:0x08E6
              Erase failed Block - 0:0:0x0D8C
              Erase failed Block - 0:0:0x0D8E
              Erase failed Block - 0:0:0x0DB2
              Erase failed Block - 0:0:0x0FD5
              Erase failed Block - 0:0:0x0FF9
              ---> Max Bad of Plane (3,3)
              ---> Max BAD/DIE = 3
       Total good blocks after SCAN: 4089 / 4100, Bad block=11
       ==> 2-Plane mode
       Max. Bad Block Allowed = 183(11)
       Adjust Max LBA = 7823360, 7823296
       MaxWindows=2/1910, MaxLBA=7823296, Size=3819 MB
       Max BAD of one plane is 3 (45),4100,1,1
       RootSector=0xF4B,Sec/Cluster=32, SuperPage=32 ---> Alignment=21
       Boot Block=0x0001,0x0002
       Lun0(7823296), Lun1(0), Public=7823296, Secure=0, CDROM=0
       Special FE Config = 54-0B-00
       Defect Table Block=0x0004
       --- Download ISP Code:F:\BACKUP\磁盘工具\U盘量产\6691量产MP_VER2162_ALL\ISP_CODE\6691_B3-A_20100331_VA10F00_9083.BIN---
       --- ISP Code installed.
       Lun0(7823296), Lun1(0), Public=7823296, Secure=0, CDROM=0
       Public,Secure,CDROM = 7823296,0,0
       SN=00306730E642F221DE7914DC
       === Preformat Done ===
       Low Level Format DONE
       Store INI/ERROR MSG to Block-0x0001:79.
       Total=7823296,CDROM=0, PublicArea=7823168, SecureArea=0
       Create SECURE(CDROM=0,Public=3819 MB,Secure=0 MB)

       --- T2 start ---
       FW version is: 0xB3
       Vendor ID is:0x0C76
       Product ID is:0x0005
       Vendor=3SYSTEM
       Product=USB Flash Disk  
       Device capacity : 0 > 39116 > 0
       DOS Volume=
       Device is formatted.
       --- T2 is done ---

       Total Capacity: 7823296 sectors, 3819 MBytes
       Elasped Time = 00:00:24
本帖最近打赏记录:共2条打赏M币+10
离线木鱼

发帖
7785
M币
223
专家
7
粉丝
5385
只看该作者 1楼 发表于: 2012-06-19
请登录后查看
离线vbn

发帖
127
M币
4238
专家
0
粉丝
17
只看该作者 2楼 发表于: 2014-09-21
请登录后查看
快速回复
限80 字节
温馨提示:所有技术区严禁灌水,“沙发”“顶”字样;禁止广告贴;以免被删除
 
上一个 下一个