板子是OCZ-VERTEX3 64G原厂板
flash test logs
<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Tue, 01/17/2017 @ 19:29:49
End Time: Tue, 01/17/2017 @ 19:30:14
OverallResult: FAIL
ExitCode: (0x10090007:SF_GENESIS_FLASH_TEST_ONLY_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 3:0:0:0
argv[3]: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/22877.0.OCZ.driveconfig
argv[5]: 027501202018625
argv[6]: 50023D00000048
argv[7]: LOG=/root/LOG/027501202018625_localhost.localdomain_DATETIMESTAMP_3.0.0.0_PROCESS_SSD_RESULT.log
Log File: /root/LOG/027501202018625_localhost.localdomain_DATETIMESTAMP_3.0.0.0_PROCESS_SSD_RESULT.log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 3
DeviceName: /dev/sg3
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 01/17/2017 19:29:49] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 3:0:0:0
argv[3]: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/22877.0.OCZ.driveconfig
argv[5]: 027501202018625
argv[6]: 50023D00000048
argv[7]: LOG=/root/LOG/027501202018625_localhost.localdomain_DATETIMESTAMP_3.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 01/17/2017 19:29:49] - Instructing the operating system to purge any existing cached data for device: '3:0:0:0'
[Tue 01/17/2017 19:29:54] - Issuing a discovery command for device: '3:0:0:0'
[Tue 01/17/2017 19:30:00] - Discovery command completed...
[Tue 01/17/2017 19:30:00] - Waiting 5 seconds for the system to settle...
[Tue 01/17/2017 19:30:05] - Device designation string '3:0:0:0' is mapped to node '/dev/sg3'
[Tue 01/17/2017 19:30:05] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg3
MFP Package Filename = /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
Configuration File = /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/22877.0.OCZ.driveconfig
Serial No. = 027501202018625
World Wide Name = 50023D00000048
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 01/17/2017 19:30:05] - Successfully received the IDENTIFY data from the drive...
[Tue 01/17/2017 19:30:05] - Validating Manufacturing Firmware Package: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Tue 01/17/2017 19:30:05] - Successfully opened the package: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
[Tue 01/17/2017 19:30:05] - file /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/22877.0.OCZ.driveconfig Loaded successfully
[Tue 01/17/2017 19:30:05] - Warning: Unable to query diagnostics information to perform power management settings check
[Tue 01/17/2017 19:30:05] - B01 Power Management configuration request detected
[Tue 01/17/2017 19:30:05] - Successfully extracted *.DriveConfig file: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/22877.0.OCZ.driveconfig
[Tue 01/17/2017 19:30:05] - Extracted Config_ID: 1 (22877) in DriveConfig file: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/22877.0.OCZ.driveconfig
[Tue 01/17/2017 19:30:05] - Extracted SerialOutputControl: 0
[Tue 01/17/2017 19:30:05] - Searching for flashware image for configuration 22877
[Tue 01/17/2017 19:30:05] - Manifest found for configuration 22877
[Tue 01/17/2017 19:30:05] - Flashware image extracted: 22877_fw_cl_mlc_Intel_64Gb_JS29F64G08ACME3_2Q_1C_1D_PP_R00924_s512.vic
[Tue 01/17/2017 19:30:05] - Searching for manufacturing image for configuration 22877
[Tue 01/17/2017 19:30:05] - Manifest found for configuration 22877
[Tue 01/17/2017 19:30:05] - Manufacturing image extracted: 22877_mf_mlc_Intel_64Gb_JS29F64G08ACME3_2Q_1C_1D_PP_R00924_s512.vic
[Tue 01/17/2017 19:30:05] - Proceeding in ROM mode, download feature 3...
[Tue 01/17/2017 19:30:05] - Successfully downloaded MFB to the drive...
[Tue 01/17/2017 19:30:05] - Waiting (5 sec) for the drive to settle...
[Tue 01/17/2017 19:30:10] - Successfully received the IDENTIFY data from the drive...
[Tue 01/17/2017 19:30:10] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful.
[Tue 01/17/2017 19:30:10] - Successfully enabled SMART capabilities...
[Tue 01/17/2017 19:30:12] - Successfully issued a diagnostic unlock...
[Tue 01/17/2017 19:30:13] - Performing the flash test of block 0 (0x0000)...
[Tue 01/17/2017 19:30:14] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 1
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 8
Number of failures: 1
Number of Passed with warnings: 0
No. Passed without warnings: 7
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 01/17/2017 19:30:14] - End of Genesis manufacturing log.
[Tue 01/17/2017 19:30:14] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Tue, 01/17/2017 @ 19:29:49 </Start_Time>
<End_Time> Tue, 01/17/2017 @ 19:30:14 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090007:SF_GENESIS_FLASH_TEST_ONLY_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 3:0:0:0
argv[3]: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/FW_PPRO_5_8_2_Release.906190.release.0.mfp
argv[4]: /linux_swap/SSD/mpt/22877/FW_PPRO_5_8_2_Release.906190.release--0/22877.0.OCZ.driveconfig
argv[5]: 027501202018625
argv[6]: 50023D00000048
argv[7]: LOG=/root/LOG/027501202018625_localhost.localdomain_DATETIMESTAMP_3.0.0.0_PROCESS_SSD_RESULT.log
</Input_Parameters>
<Log_File> /root/LOG/027501202018625_localhost.localdomain_DATETIMESTAMP_3.0.0.0_PROCESS_SSD_RESULT.log </Log_File>
<Hostname> localhost.localdomain </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 3 </Port_Number>
<Device_Name> /dev/sg3 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Tue 01/17/2017 19:30:14] - Overall Result for Device: /dev/sg3 ****** FAIL ******
这片有问题
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
0001在这个板子上应该是那一片位置啊？是第2片吗？ 大神帮忙看下
