<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Tue, 12/11/2018 @ 19:56:55
End Time: Tue, 12/11/2018 @ 19:57:41
OverallResult: FAIL
ExitCode: (0x10090008:SF_GENESIS_FORMAT_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 4:0:0:0
argv[3]: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/FW_PPRO_6_0_A_Release.1134440.release.12345.mfp
argv[4]: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/Configuration_Files/31038.12345.ct.edriveconfig
argv[5]: 13141112
argv[6]: 201314001112
argv[7]: LOG=/root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/VIC_Files/13141112_localhost.localdomain_DATETIMESTAMP_4.0.0.0_PROCESS_SSD_RESULT.log
argv[8]: 19:0:0:0
Log File: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/VIC_Files/13141112_localhost.localdomain_DATETIMESTAMP_4.0.0.0_PROCESS_SSD_RESULT.log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 2
DeviceName: /dev/sg2
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.32-573.el6.i686 #1 SMP Thu Jul 23 12:37:35 UTC 2015 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 12/11/2018 19:56:55] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 4:0:0:0
argv[3]: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/FW_PPRO_6_0_A_Release.1134440.release.12345.mfp
argv[4]: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/Configuration_Files/31038.12345.ct.edriveconfig
argv[5]: 13141112
argv[6]: 201314001112
argv[7]: LOG=/root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/VIC_Files/13141112_localhost.localdomain_DATETIMESTAMP_4.0.0.0_PROCESS_SSD_RESULT.log
argv[8]: 19:0:0:0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 12/11/2018 19:56:55] - Instructing the operating system to purge any existing cached data for device: '4:0:0:0'
[Tue 12/11/2018 19:57:00] - Issuing a discovery command for device: '4:0:0:0'
[Tue 12/11/2018 19:57:05] - Discovery command completed...
[Tue 12/11/2018 19:57:05] - Waiting 5 seconds for the system to settle...
[Tue 12/11/2018 19:57:10] - Device designation string '4:0:0:0' is mapped to node '/dev/sg2'
[Tue 12/11/2018 19:57:10] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg2
MFP Package Filename = /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/FW_PPRO_6_0_A_Release.1134440.release.12345.mfp
Configuration File = /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/Configuration_Files/31038.12345.ct.edriveconfig
Serial No. = 13141112
World Wide Name = 201314001112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 12/11/2018 19:57:10] - Successfully received the IDENTIFY data from the drive...
[Tue 12/11/2018 19:57:10] - Validating Manufacturing Firmware Package: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/FW_PPRO_6_0_A_Release.1134440.release.12345.mfp
[Tue 12/11/2018 19:57:10] - Successfully opened the package: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/FW_PPRO_6_0_A_Release.1134440.release.12345.mfp
[Tue 12/11/2018 19:57:10] - File : /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/Configuration_Files/31038.12345.ct.edriveconfig in processing ...
[Tue 12/11/2018 19:57:10] - file /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/Configuration_Files/31038.12345.ct.edriveconfig Loaded successfully
[Tue 12/11/2018 19:57:18] - B01 Power Management configuration request detected
[Tue 12/11/2018 19:57:18] - B01 Power Management conforms to hardware version 0x0
[Tue 12/11/2018 19:57:18] - Successfully extracted *.DriveConfig file: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/Configuration_Files/31038.12345.ct.edriveconfig
[Tue 12/11/2018 19:57:18] - Extracted Config_ID: 1 (31038) in DriveConfig file: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/Configuration_Files/31038.12345.ct.edriveconfig
[Tue 12/11/2018 19:57:18] - Extracted SerialOutputControl: 0
[Tue 12/11/2018 19:57:18] - Searching for flashware image for configuration 31038
[Tue 12/11/2018 19:57:18] - Manifest found for configuration 31038
[Tue 12/11/2018 19:57:18] - Flashware image extracted: 31038_fw_cl_mlc_Micron_128Gb_33bit_MT29F128G08CBECB_1Q_2C_1D_S_PP_R02800_s512.vic
[Tue 12/11/2018 19:57:18] - Searching for manufacturing image for configuration 31038
[Tue 12/11/2018 19:57:18] - Manifest found for configuration 31038
[Tue 12/11/2018 19:57:18] - Manufacturing image extracted: 31038_mf_mlc_Micron_128Gb_33bit_MT29F128G08CBECB_1Q_2C_1D_S_PP_R02800_s512.vic
[Tue 12/11/2018 19:57:18] - Proceeding in ROM mode, download feature 3...
[Tue 12/11/2018 19:57:19] - Successfully downloaded MFB to the drive...
[Tue 12/11/2018 19:57:19] - Waiting (5 sec) for the drive to settle...
[Tue 12/11/2018 19:57:24] - Successfully received the IDENTIFY data from the drive...
[Tue 12/11/2018 19:57:24] - Firmware revision reported to be: '60AABBM0'. This indicates MFB download was successful.
[Tue 12/11/2018 19:57:24] - Successfully enabled SMART capabilities...
[Tue 12/11/2018 19:57:26] - Successfully issued a diagnostic unlock...
[Tue 12/11/2018 19:57:27] - Performing the flash test of block 0 (0x0000)...
[Tue 12/11/2018 19:57:30] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 1
Chip Enabled Count: 2
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 8
Number of failures: 0
Number of Passed with warnings: 8
No. Passed without warnings: 0
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 12/11/2018 19:57:30] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 250069680
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 33836 (0x842C)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 1
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Tue 12/11/2018 19:57:41] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x0000C048:SF_SCT (C048h): Root Creation Failed (MFB format))
[Tue 12/11/2018 19:57:41] - End of Genesis manufacturing log.
[Tue 12/11/2018 19:57:41] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Tue, 12/11/2018 @ 19:56:55 </Start_Time>
<End_Time> Tue, 12/11/2018 @ 19:57:41 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090008:SF_GENESIS_FORMAT_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 4:0:0:0
argv[3]: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/FW_PPRO_6_0_A_Release.1134440.release.12345.mfp
argv[4]: /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/Configuration_Files/31038.12345.ct.edriveconfig
argv[5]: 13141112
argv[6]: 201314001112
argv[7]: LOG=/root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/VIC_Files/13141112_localhost.localdomain_DATETIMESTAMP_4.0.0.0_PROCESS_SSD_RESULT.log
argv[8]: 19:0:0:0
</Input_Parameters>
<Log_File> /root/Desktop/sf2281/MFP/FW_PPRO_6_0_A_Release.1134440.release--12345/VIC_Files/13141112_localhost.localdomain_DATETIMESTAMP_4.0.0.0_PROCESS_SSD_RESULT.log </Log_File>
<Hostname> localhost.localdomain </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 2 </Port_Number>
<Device_Name> /dev/sg2 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.32-573.el6.i686 #1 SMP Thu Jul 23 12:37:35 UTC 2015 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Tue 12/11/2018 19:57:41] - Overall Result for Device: /dev/sg2 ****** FAIL ******
＞大于五个字
