想重新开下5.2.2固件，选择20016配置文件，刷新时候出现如下错误。
我卡开的时候没用强制跳线开机自动识别的，是否需要强制跳线才行另外强制跳线是不是左上角2个点？ 最新消息，接短跳线后可以开卡，但是到71%的时候报错。。。。 贴LOG文件
Starting command:[/root/soft/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 2:0:1:0 "/root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/FW_PPRO_5_2_2_Release.672199.release.123456.mfp" "/root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/20016.123456.driveconfig" 150303192AF6 0 LOG="/root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/150303192AF6_localhost.localdomain_DATETIMESTAMP_2.0.1.0_PROCESS_SSD_RESULT.log" ]...~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 01/21/2015 00:26:05] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 2:0:1:0
argv[3]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/FW_PPRO_5_2_2_Release.672199.release.123456.mfp
argv[4]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/20016.123456.driveconfig
argv[5]: 150303192AF6
argv[6]: 0
argv[7]: LOG=/root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/150303192AF6_localhost.localdomain_DATETIMESTAMP_2.0.1.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 01/21/2015 00:26:05] - Instructing the operating system to purge any existing cached data for device: '2:0:1:0'
[Wed 01/21/2015 00:26:10] - Issuing a discovery command for device: '2:0:1:0'
[Wed 01/21/2015 00:26:15] - Discovery command completed...
[Wed 01/21/2015 00:26:15] - Waiting 5 seconds for the system to settle...
[Wed 01/21/2015 00:26:20] - Device designation string '2:0:1:0' is mapped to node '/dev/sg1'
[Wed 01/21/2015 00:26:20] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg1
MFP Package Filename = /root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/FW_PPRO_5_2_2_Release.672199.release.123456.mfp
Configuration File = /root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/20016.123456.driveconfig
Serial No. = 150303192AF6
World Wide Name = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 01/21/2015 00:26:20] - Successfully received the IDENTIFY data from the drive...
[Wed 01/21/2015 00:26:20] - Validating Manufacturing Firmware Package: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/FW_PPRO_5_2_2_Release.672199.release.123456.mfp
[Wed 01/21/2015 00:26:24] - Successfully opened the package: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/FW_PPRO_5_2_2_Release.672199.release.123456.mfp
[Wed 01/21/2015 00:26:24] - file /root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/20016.123456.driveconfig Loaded successfully
[Wed 01/21/2015 00:26:24] - Warning: Unable to query diagnostics information to perform power management settings check
[Wed 01/21/2015 00:26:24] - B01 Power Management configuration request detected
[Wed 01/21/2015 00:26:24] - Successfully extracted *.DriveConfig file: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/20016.123456.driveconfig
[Wed 01/21/2015 00:26:24] - Extracted Config_ID: 1 (20016) in DriveConfig file: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--123456/20016.123456.driveconfig
[Wed 01/21/2015 00:26:24] - Extracted SerialOutputControl: 0
[Wed 01/21/2015 00:26:24] - Searching for flashware image for configuration 20016
[Wed 01/21/2015 00:26:24] - Manifest found for configuration 20016
[Wed 01/21/2015 00:26:24] - Flashware image extracted: 20016_fw_cl_mlc_Micron_64Gb_MT29F64G08CBCABH1_1Q_2C_1D_PP_R00435_s512.vic
[Wed 01/21/2015 00:26:24] - Searching for manufacturing image for configuration 20016
[Wed 01/21/2015 00:26:24] - Manifest found for configuration 20016
[Wed 01/21/2015 00:26:24] - Manufacturing image extracted: 20016_mf_mlc_Micron_64Gb_MT29F64G08CBCABH1_1Q_2C_1D_PP_R00435_s512.vic
[Wed 01/21/2015 00:26:24] - Proceeding in ROM mode, download feature 3...
[Wed 01/21/2015 00:26:25] - Successfully downloaded MFB to the drive...
[Wed 01/21/2015 00:26:25] - Waiting (5 sec) for the drive to settle...
[Wed 01/21/2015 00:26:30] - Successfully received the IDENTIFY data from the drive...
[Wed 01/21/2015 00:26:30] - Firmware revision reported to be: '522ABBM0'. This indicates MFB download was successful.
[Wed 01/21/2015 00:26:30] - Successfully enabled SMART capabilities...
[Wed 01/21/2015 00:26:32] - Successfully issued a diagnostic unlock...
[Wed 01/21/2015 00:26:33] - Performing the flash test of block 0 (0x0000)...
[Wed 01/21/2015 00:26:34] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 1
Chip Enabled Count: 2
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 8
Number of failures: 0
Number of Passed with warnings: 8
No. Passed without warnings: 0
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 01/21/2015 00:26:34] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 125045424
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 34860 (0x882C)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 1
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 01/21/2015 00:26:52] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x0000C048:SF_SCT (C048h): Root Creation Failed (MFB format))
[Wed 01/21/2015 00:26:52] - End of Genesis manufacturing log.
[Wed 01/21/2015 00:26:52] - Exiting...
[Wed 01/21/2015 00:26:52] - Overall Result for Device: /dev/sg1 ****** FAIL ******
Process exited with code 8
[ 此帖被xitianming在2015-01-21 00:35重新编辑 ]
