好久不玩ssd了，今天买了个清空器，
6贴 128G08CFAAB 开卡每次都20%失败22437 开6贴失败 8贴22187当然也失败 4贴22452 pass所有F都清空过 坏块4个请教啊 
Starting command:[/home/scl/ssd/soft/SF_Genesis -PROCESS_SSD 1:0:0:0 "/home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp" "/home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/22437.123456.90G.driveconfig" 12345 12345 LOG="/home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/Configuration_Files/12345_scl_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log" ]...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 05/03/2015 01:35:12] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 1:0:0:0
argv[3]: /home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
argv[4]: /home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/22437.123456.90G.driveconfig
argv[5]: 12345
argv[6]: 12345
argv[7]: LOG=/home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/Configuration_Files/12345_scl_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 05/03/2015 01:35:12] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0'
[Sun 05/03/2015 01:35:17] - Issuing a discovery command for device: '1:0:0:0'
[Sun 05/03/2015 01:35:23] - Discovery command completed...
[Sun 05/03/2015 01:35:23] - Waiting 5 seconds for the system to settle...
[Sun 05/03/2015 01:35:28] - Device designation string '1:0:0:0' is mapped to node '/dev/sg1'
[Sun 05/03/2015 01:35:28] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg1
MFP Package Filename = /home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
Configuration File = /home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/22437.123456.90G.driveconfig
Serial No. = 12345
World Wide Name = 12345
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 05/03/2015 01:35:28] - Successfully received the IDENTIFY data from the drive...
[Sun 05/03/2015 01:35:28] - Validating Manufacturing Firmware Package: /home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
[Sun 05/03/2015 01:35:32] - Successfully opened the package: /home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
[Sun 05/03/2015 01:35:32] - file /home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/22437.123456.90G.driveconfig Loaded successfully
[Sun 05/03/2015 01:35:33] - B01 Power Management configuration request detected
[Sun 05/03/2015 01:35:33] - B01 Power Management conforms to hardware version 0x200026BB
[Sun 05/03/2015 01:35:33] - Successfully extracted *.DriveConfig file: /home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/22437.123456.90G.driveconfig
[Sun 05/03/2015 01:35:33] - Extracted Config_ID: 1 (22437) in DriveConfig file: /home/scl/ssd/mpt/FW_SF-2000_MP_5-0-7_Client--123456/22437.123456.90G.driveconfig
[Sun 05/03/2015 01:35:33] - Extracted SerialOutputControl: 0
[Sun 05/03/2015 01:35:33] - Searching for flashware image for configuration 22437
[Sun 05/03/2015 01:35:33] - Manifest found for configuration 22437
[Sun 05/03/2015 01:35:33] - Flashware image extracted: 22437_fw_cl_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_PP_R01374_s512.vic
[Sun 05/03/2015 01:35:33] - Searching for manufacturing image for configuration 22437
[Sun 05/03/2015 01:35:33] - Manifest found for configuration 22437
[Sun 05/03/2015 01:35:33] - Manufacturing image extracted: 22437_mf_mlc_Micron_64Gb_MT29F128G08CFAAAWP_2Q_2C_1D_PP_R01374_s512.vic
[Sun 05/03/2015 01:35:33] - Proceeding in non-ROM mode, Download feature 3...
[Sun 05/03/2015 01:35:33] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 4 (0x04) FAIL
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 1607.420560] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1607.420606] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1607.421030] sdb: unknown partition table
[ 1607.421752] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1643.313790] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1643.316915] sd 1:0:0:0: [sdb] Stopping disk
[ 1643.343597] ata2.00: disabled
[ 1648.349588] ata2: hard resetting link
[ 1648.809090] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1648.823038] ata2.00: ATA-8: SandForce[565850], 507, max UDMA/133
[ 1648.823050] ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1648.832807] ata2.00: configured for UDMA/133
[ 1648.832832] ata2: EH complete
[ 1648.833295] scsi 1:0:0:0: Direct-Access ATA SandForce[565850 507 PQ: 0 ANSI: 5
[ 1648.833762] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1648.833866] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1648.833982] sd 1:0:0:0: [sdb] Write Protect is off
[ 1648.833990] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1648.834039] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1648.834716] sdb: unknown partition table
[ 1648.839477] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1822.858116] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
[ 1822.858126] ata2: irq_stat 0x00400000, PHY RDY changed
[ 1822.858136] ata2: SError: { RecovComm Persist PHYRdyChg 10B8B }
[ 1822.858150] ata2: hard resetting link
[ 1824.230141] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1824.250067] ata2.00: configured for UDMA/133
[ 1824.250080] ata2: EH complete
[ 1944.604078] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1944.607427] sd 1:0:0:0: [sdb] Stopping disk
[ 1944.632579] ata2.00: disabled
[ 1949.638240] ata2: hard resetting link
[ 1950.098079] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1950.111495] ata2.00: ATA-8: SandForce[565850], 507, max UDMA/133
[ 1950.111506] ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1950.121306] ata2.00: configured for UDMA/133
[ 1950.121330] ata2: EH complete
[ 1950.121695] scsi 1:0:0:0: Direct-Access ATA SandForce[565850 507 PQ: 0 ANSI: 5
[ 1950.122223] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1950.122700] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1950.122812] sd 1:0:0:0: [sdb] Write Protect is off
[ 1950.122820] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1950.122869] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1950.123246] sdb: unknown partition table
[ 1950.123940] sd 1:0:0:0: [sdb] Attached SCSI disk
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 05/03/2015 01:35:33] - End of Genesis manufacturing log.
[Sun 05/03/2015 01:35:33] - Exiting...
[Sun 05/03/2015 01:35:33] - Overall Result for Device: /dev/sg1 ****** FAIL ******
Process exited with code 20
[ 此帖被sclwindows在2015-05-02 17:58重新编辑 ]
