开卡失败，焊接放大镜检查过了，没有虚焊 没有短路.SF2281的主控，用的是29f64g08cbaaawp的F，准备先焊4片开个32G的试试看的。一直失败中。配置中，电源保护开了，温度选项选择的TM75的。
下面是开卡的log
Starting command:[/root/soft/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 2:0:0:0 "/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp" "/root/mpt/22454.123456.driveconfig" 2281 2281 LOG="/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/2281_ddk_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log" ]...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 09/28/2014 08:46:05] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 2:0:0:0
argv[3]: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
argv[4]: /root/mpt/22454.123456.driveconfig
argv[5]: 2281
argv[6]: 2281
argv[7]: LOG=/root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/2281_ddk_DATETIMESTAMP_2.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 09/28/2014 08:46:05] - Instructing the operating system to purge any existing cached data for device: '2:0:0:0'
[Sun 09/28/2014 08:46:10] - Issuing a discovery command for device: '2:0:0:0'
[Sun 09/28/2014 08:46:16] - Discovery command completed...
[Sun 09/28/2014 08:46:16] - Waiting 5 seconds for the system to settle...
[Sun 09/28/2014 08:46:21] - Device designation string '2:0:0:0' is mapped to node '/dev/sg2'
[Sun 09/28/2014 08:46:21] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg2
MFP Package Filename = /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
Configuration File = /root/mpt/22454.123456.driveconfig
Serial No. = 2281
World Wide Name = 2281
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 09/28/2014 08:46:21] - Successfully received the IDENTIFY data from the drive...
[Sun 09/28/2014 08:46:21] - Validating Manufacturing Firmware Package: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
[Sun 09/28/2014 08:46:29] - Successfully opened the package: /root/mpt/FW_SF-2000_MP_5-0-7_Client--123456/FW_SF-2000_MP_5-0-7_Client.123456.mfp
[Sun 09/28/2014 08:46:29] - file /root/mpt/22454.123456.driveconfig Loaded successfully
[Sun 09/28/2014 08:46:29] - Warning: Unable to query diagnostics information to perform power management settings check
[Sun 09/28/2014 08:46:29] - B01 Power Management configuration request detected
[Sun 09/28/2014 08:46:29] - Successfully extracted *.DriveConfig file: /root/mpt/22454.123456.driveconfig
[Sun 09/28/2014 08:46:29] - Extracted Config_ID: 1 (22454) in DriveConfig file: /root/mpt/22454.123456.driveconfig
[Sun 09/28/2014 08:46:29] - Extracted SerialOutputControl: 0
[Sun 09/28/2014 08:46:29] - Searching for flashware image for configuration 22454
[Sun 09/28/2014 08:46:29] - Manifest found for configuration 22454
[Sun 09/28/2014 08:46:29] - Flashware image extracted: 22454_fw_cl_mlc_Micron_64Gb_MT29F64G08CBAAAWP_1Q_1C_1D_PP_R00819_s512.vic
[Sun 09/28/2014 08:46:29] - Searching for manufacturing image for configuration 22454
[Sun 09/28/2014 08:46:29] - Manifest found for configuration 22454
[Sun 09/28/2014 08:46:29] - Manufacturing image extracted: 22454_mf_mlc_Micron_64Gb_MT29F64G08CBAAAWP_1Q_1C_1D_PP_R00819_s512.vic
[Sun 09/28/2014 08:46:29] - Proceeding in ROM mode, download feature 3...
[Sun 09/28/2014 08:47:35] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 174.460470] ata3.00: failed command: STANDBY IMMEDIATE
[ 174.460474] ata3.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 174.460475] res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 174.460477] ata3.00: status: { DRDY ERR }
[ 174.460479] ata3.00: error: { ABRT }
[ 174.460485] ata3.00: device reported invalid CHS sector 0
[ 174.460495] sd 2:0:0:0: [sdc] START_STOP FAILED
[ 174.460497] sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 174.460500] sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
[ 174.460503] sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
[ 174.460527] ata3.00: disabled
[ 179.462687] ata3: hard resetting link
[ 179.918050] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 179.918261] ata3.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[ 179.918264] ata3.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 179.921244] ata3.00: configured for UDMA/133
[ 179.921249] ata3: EH complete
[ 179.921323] scsi 2:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
[ 179.923781] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 179.924822] sd 2:0:0:0: [sdc] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 179.924824] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 179.924866] sd 2:0:0:0: [sdc] Write Protect is off
[ 179.924868] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 179.924887] sd 2:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 179.925490] sdc: unknown partition table
[ 179.931693] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 203.712150] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 203.712154] ata3.00: failed command: DOWNLOAD MICROCODE
[ 203.712159] ata3.00: cmd 92/03:66:00:80:01/00:00:00:00:00/00 tag 0 pio 52224 out
[ 203.712160] res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 203.712162] ata3.00: status: { DRDY }
[ 203.712169] ata3: hard resetting link
[ 209.217015] ata3: link is slow to respond, please be patient (ready=0)
[ 213.756014] ata3: SRST failed (errno=-16)
[ 213.756023] ata3: hard resetting link
[ 219.261014] ata3: link is slow to respond, please be patient (ready=0)
[ 223.800011] ata3: SRST failed (errno=-16)
[ 223.800020] ata3: hard resetting link
[ 229.305012] ata3: link is slow to respond, please be patient (ready=0)
[ 258.834012] ata3: SRST failed (errno=-16)
[ 258.834021] ata3: limiting SATA link speed to 1.5 Gbps
[ 258.834028] ata3: hard resetting link
[ 263.880013] ata3: SRST failed (errno=-16)
[ 263.880018] ata3: reset failed, giving up
[ 263.880021] ata3.00: disabled
[ 263.880039] ata3: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 09/28/2014 08:47:35] - End of Genesis manufacturing log.
[Sun 09/28/2014 08:47:35] - Exiting...
[Sun 09/28/2014 08:47:35] - Overall Result for Device: /dev/sg2 ****** FAIL ******
Process exited with code 20
