SF2281 贴TC58NVG6D2HTA00 128G开卡83%报错，请高手
Starting command:[/root/SOFT/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 1:0:0:0 "/root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/FW_SF-2000_MP_5-2-0_Client.123456.mfp" "/root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/27100.123456.driveconfig" 123456 123456 LOG="/root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/123456_a_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log" -EEPROM="/root/2000-4000/SF-2281_EEPROM-KingStone_V300.BIN" ]...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 03/30/2017 06:43:48] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 1:0:0:0
argv[3]: /root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/FW_SF-2000_MP_5-2-0_Client.123456.mfp
argv[4]: /root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/27100.123456.driveconfig
argv[5]: 123456
argv[6]: 123456
argv[7]: LOG=/root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/123456_a_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log
argv[8]: -EEPROM=/root/2000-4000/SF-2281_EEPROM-KingStone_V300.BIN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 03/30/2017 06:43:48] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0'
[Thu 03/30/2017 06:43:53] - Issuing a discovery command for device: '1:0:0:0'
[Thu 03/30/2017 06:43:58] - Discovery command completed...
[Thu 03/30/2017 06:43:58] - Waiting 5 seconds for the system to settle...
[Thu 03/30/2017 06:44:03] - Device designation string '1:0:0:0' is mapped to node '/dev/sg1'
[Thu 03/30/2017 06:44:03] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg1
MFP Package Filename = /root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/FW_SF-2000_MP_5-2-0_Client.123456.mfp
Configuration File = /root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/27100.123456.driveconfig
Serial No. = 123456
World Wide Name = 123456
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 03/30/2017 06:44:03] - Successfully received the IDENTIFY data from the drive...
[Thu 03/30/2017 06:44:03] - Validating Manufacturing Firmware Package: /root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/FW_SF-2000_MP_5-2-0_Client.123456.mfp
[Thu 03/30/2017 06:44:34] - Successfully opened the package: /root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/FW_SF-2000_MP_5-2-0_Client.123456.mfp
[Thu 03/30/2017 06:44:34] - file /root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/27100.123456.driveconfig Loaded successfully
[Thu 03/30/2017 06:44:34] - Warning: Unable to query diagnostics information to perform power management settings check
[Thu 03/30/2017 06:44:34] - B01 Power Management configuration request detected
[Thu 03/30/2017 06:44:34] - Successfully extracted *.DriveConfig file: /root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/27100.123456.driveconfig
[Thu 03/30/2017 06:44:34] - Extracted Config_ID: 1 (27100) in DriveConfig file: /root/2000-4000/FW_SF-2000_MP_5-2-0_Client--123456/27100.123456.driveconfig
[Thu 03/30/2017 06:44:34] - Extracted SerialOutputControl: 0
[Thu 03/30/2017 06:44:35] - Searching for flashware image for configuration 27100
[Thu 03/30/2017 06:44:35] - Manifest found for configuration 27100
[Thu 03/30/2017 06:44:35] - Flashware image extracted: 27100_fw_cl_mlc_Toshiba_64Gb_TC58NVG6D2HTA00_2Q_2C_1D_S_PP_R01111_s512.vic
[Thu 03/30/2017 06:44:35] - Searching for manufacturing image for configuration 27100
[Thu 03/30/2017 06:44:35] - Manifest found for configuration 27100
[Thu 03/30/2017 06:44:35] - Manufacturing image extracted: 27100_mf_mlc_Toshiba_64Gb_TC58NVG6D2HTA00_2Q_2C_1D_S_PP_R01111_s512.vic
[Thu 03/30/2017 06:44:35] - Proceeding in ROM mode, download feature 3...
[Thu 03/30/2017 06:44:35] - Successfully downloaded MFB to the drive...
[Thu 03/30/2017 06:44:35] - Waiting (5 sec) for the drive to settle...
[Thu 03/30/2017 06:44:40] - Successfully received the IDENTIFY data from the drive...
[Thu 03/30/2017 06:44:40] - Firmware revision reported to be: '520ABBM0'. This indicates MFB download was successful.
[Thu 03/30/2017 06:44:40] - Successfully enabled SMART capabilities...
[Thu 03/30/2017 06:44:42] - Successfully issued a diagnostic unlock...
[Thu 03/30/2017 06:44:42] - Starting to update EEPROM from file /root/2000-4000/SF-2281_EEPROM-KingStone_V300.BIN
[Thu 03/30/2017 06:47:03] - VERIFICATION: What is written and what is read ** matched **
[Thu 03/30/2017 06:47:03] - EEPROM update successful
[Thu 03/30/2017 06:47:04] - Performing the flash test of block 0 (0x0000)...
[Thu 03/30/2017 06:47:06] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 2
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 16
Number of failures: 0
Number of Passed with warnings: 0
No. Passed without warnings: 16
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 03/30/2017 06:47:06] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 0
LogicalCapacity = 250069680
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 56984 (0xDE98)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 1
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 03/30/2017 06:47:40] - FORMAT command completed...
[Thu 03/30/2017 06:47:40] - Waiting (2 sec) for the drive to settle...
[Thu 03/30/2017 06:47:42] - Setting up the stamp information through CDU command...
[Thu 03/30/2017 06:47:45] - Waiting (2 sec) for the drive to settle...
[Thu 03/30/2017 06:47:47] - Downloading the flashware to the drive... feature 3
[Thu 03/30/2017 06:47:48] - Successfully downloaded flashware to the drive...
[Thu 03/30/2017 06:47:48] - Waiting (15 sec) for the drive to settle...
[Thu 03/30/2017 06:48:03] - Successfully received the IDENTIFY data from the drive...
[Thu 03/30/2017 06:48:03] - FATAL_ERROR: Did not recieve the correct firmware revision. it is reported to be: '20DABBR0', indicating flashware download has failed.
[Thu 03/30/2017 06:48:03] - End of Genesis manufacturing log.
[Thu 03/30/2017 06:48:03] - Exiting...
[Thu 03/30/2017 06:48:03] - Overall Result for Device: /dev/sg1 ****** FAIL ******
Process exited with code 18指教
