有没有大神指点一下呢
<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Fri, 09/08/2017 @ 06:56:34
End Time: Fri, 09/08/2017 @ 06:57:26
OverallResult: FAIL
ExitCode: (0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 1:0:0:0
argv[3]: /root/SF2000/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--123456/FW_SF-2000_B01_MP1-refresh_3-1-9.123456.mfp
argv[4]: /root/SF2000/mpt/rom/22167.123456.driveconfig
argv[5]: 111111111111
argv[6]: 1200320045006200
argv[7]: LOG=/root/SF2000/mpt/log/111111111111_localhost.localdomain_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log
Log File: /root/SF2000/mpt/log/111111111111_localhost.localdomain_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 1
DeviceName: /dev/sg1
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/08/2017 06:56:34] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 1:0:0:0
argv[3]: /root/SF2000/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--123456/FW_SF-2000_B01_MP1-refresh_3-1-9.123456.mfp
argv[4]: /root/SF2000/mpt/rom/22167.123456.driveconfig
argv[5]: 111111111111
argv[6]: 1200320045006200
argv[7]: LOG=/root/SF2000/mpt/log/111111111111_localhost.localdomain_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/08/2017 06:56:34] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0'
[Fri 09/08/2017 06:56:39] - Issuing a discovery command for device: '1:0:0:0'
[Fri 09/08/2017 06:56:44] - Discovery command completed...
[Fri 09/08/2017 06:56:44] - Waiting 5 seconds for the system to settle...
[Fri 09/08/2017 06:56:49] - Device designation string '1:0:0:0' is mapped to node '/dev/sg1'
[Fri 09/08/2017 06:56:49] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg1
MFP Package Filename = /root/SF2000/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--123456/FW_SF-2000_B01_MP1-refresh_3-1-9.123456.mfp
Configuration File = /root/SF2000/mpt/rom/22167.123456.driveconfig
Serial No. = 111111111111
World Wide Name = 1200320045006200
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/08/2017 06:56:49] - Successfully received the IDENTIFY data from the drive...
[Fri 09/08/2017 06:56:49] - Validating Manufacturing Firmware Package: /root/SF2000/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--123456/FW_SF-2000_B01_MP1-refresh_3-1-9.123456.mfp
[Fri 09/08/2017 06:56:50] - Successfully opened the package: /root/SF2000/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--123456/FW_SF-2000_B01_MP1-refresh_3-1-9.123456.mfp
[Fri 09/08/2017 06:56:50] - file /root/SF2000/mpt/rom/22167.123456.driveconfig Loaded successfully
[Fri 09/08/2017 06:56:50] - Warning: Unable to query diagnostics information to perform power management settings check
[Fri 09/08/2017 06:56:50] - B01 Power Management configuration request detected
[Fri 09/08/2017 06:56:50] - Successfully extracted *.DriveConfig file: /root/SF2000/mpt/rom/22167.123456.driveconfig
[Fri 09/08/2017 06:56:50] - Extracted Config_ID: 1 (22167) in DriveConfig file: /root/SF2000/mpt/rom/22167.123456.driveconfig
[Fri 09/08/2017 06:56:50] - Extracted SerialOutputControl: 0
[Fri 09/08/2017 06:56:50] - Searching for flashware image for configuration 22167
[Fri 09/08/2017 06:56:50] - Manifest found for configuration 22167
[Fri 09/08/2017 06:56:50] - Flashware image extracted: 22167_fw_cl_mlc_Intel_64Gb_JS29F64G08AAME1_2Q_1C_1D_PP_R00689_s512.vic
[Fri 09/08/2017 06:56:50] - Searching for manufacturing image for configuration 22167
[Fri 09/08/2017 06:56:50] - Manifest found for configuration 22167
[Fri 09/08/2017 06:56:50] - Manufacturing image extracted: 22167_mf_mlc_Intel_64Gb_JS29F64G08AAME1_2Q_1C_1D_PP_R00689_s512.vic
[Fri 09/08/2017 06:56:50] - Proceeding in ROM mode, download feature 3...
[Fri 09/08/2017 06:56:51] - Successfully downloaded MFB to the drive...
[Fri 09/08/2017 06:56:51] - Waiting (5 sec) for the drive to settle...
[Fri 09/08/2017 06:56:56] - Successfully received the IDENTIFY data from the drive...
[Fri 09/08/2017 06:56:56] - Firmware revision reported to be: '319ABBM0'. This indicates MFB download was successful.
[Fri 09/08/2017 06:56:56] - Successfully enabled SMART capabilities...
[Fri 09/08/2017 06:56:58] - Successfully issued a diagnostic unlock...
[Fri 09/08/2017 06:56:59] - Performing the flash test of block 0 (0x0000)...
[Fri 09/08/2017 06:57:00] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 1
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0003 | N1,N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 8
Number of failures: 0
Number of Passed with warnings: 8
No. Passed without warnings: 0
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/08/2017 06:57:00] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MemoryWearCycleCapability = 0
CurrentPE_CycleCount = 0
LifeInSeconds = 94608000
LogicalCapacity = 125045424
SectorSize = 512
SectorAlignmentOffset = 0
ExpectedMemoryID = 34953 (0x8889)
ExpectedNumDies = 0
SerialOutputControl = 0
Time[8] = 0x0000000000000000
MiscFlag_Erase_R_Block = 0
MiscFlag_PanicHandlingEnabled = 0
MiscFlag_PanicOnSATA_Error = 0
MiscFlag_WriteThrottlingTestMode = 0
MiscFlag_DisableUserBandECCX = 1
L_PageSize = 0
E_PageSize = 0
ErrorCorrectionPower = 0
ConfigDeviceReadDisturbCount = 0
ConfigDeviceReadDisturbCountLow = 0
ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/08/2017 06:57:19] - FORMAT command completed...
[Fri 09/08/2017 06:57:19] - Waiting (2 sec) for the drive to settle...
[Fri 09/08/2017 06:57:21] - Setting up the stamp information through CDU command...
[Fri 09/08/2017 06:57:24] - Waiting (2 sec) for the drive to settle...
[Fri 09/08/2017 06:57:26] - Downloading the flashware to the drive... feature 3
[Fri 09/08/2017 06:57:26] - FATAL_ERROR: Could not download flashware to the drive... (0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 4 (0x04) FAIL
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 1287.988919] sd 1:0:0:0: [sdb] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 1287.988926] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1287.989005] sd 1:0:0:0: [sdb] Write Protect is off
[ 1287.989011] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1287.989044] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1287.989708] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1287.989981] sdb: unknown partition table
[ 1288.000153] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1318.238676] sd 1:0:0:0: [sdb] Stopping disk
[ 1318.238797] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1318.238810] ata2.00: irq_stat 0x40000001
[ 1318.238819] ata2.00: failed command: STANDBY IMMEDIATE
[ 1318.238839] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 1318.238843] res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1318.238852] ata2.00: status: { DRDY ERR }
[ 1318.238859] ata2.00: error: { ABRT }
[ 1318.238883] ata2.00: device reported invalid CHS sector 0
[ 1318.239150] sd 1:0:0:0: [sdb] START_STOP FAILED
[ 1318.239159] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1318.239169] sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor]
[ 1318.239182] sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
[ 1318.239303] ata2.00: disabled
[ 1323.241322] ata2: hard resetting link
[ 1323.545777] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1323.545968] ACPI Error (psargs-0359): [DSSP] Namespace lookup failure, AE_NOT_FOUND
[ 1323.545981] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f68304e0), AE_NOT_FOUND
[ 1323.546792] ata2.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[ 1323.546802] ata2.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1323.550372] ACPI Error (psargs-0359): [DSSP] Namespace lookup failure, AE_NOT_FOUND
[ 1323.550383] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f68304e0), AE_NOT_FOUND
[ 1323.552484] ata2.00: configured for UDMA/133
[ 1323.552496] ata2: EH complete
[ 1323.552710] scsi 1:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
[ 1323.553176] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1323.553353] sd 1:0:0:0: [sdb] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 1323.553364] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1323.553495] sd 1:0:0:0: [sdb] Write Protect is off
[ 1323.553504] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1323.553560] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1323.554051] sdb: unknown partition table
[ 1323.564337] sd 1:0:0:0: [sdb] Attached SCSI disk
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Fri 09/08/2017 06:57:26] - End of Genesis manufacturing log.
[Fri 09/08/2017 06:57:26] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Fri, 09/08/2017 @ 06:56:34 </Start_Time>
<End_Time> Fri, 09/08/2017 @ 06:57:26 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 1:0:0:0
argv[3]: /root/SF2000/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--123456/FW_SF-2000_B01_MP1-refresh_3-1-9.123456.mfp
argv[4]: /root/SF2000/mpt/rom/22167.123456.driveconfig
argv[5]: 111111111111
argv[6]: 1200320045006200
argv[7]: LOG=/root/SF2000/mpt/log/111111111111_localhost.localdomain_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log
</Input_Parameters>
<Log_File> /root/SF2000/mpt/log/111111111111_localhost.localdomain_DATETIMESTAMP_1.0.0.0_PROCESS_SSD_RESULT.log </Log_File>
<Hostname> localhost.localdomain </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 1 </Port_Number>
<Device_Name> /dev/sg1 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Fri 09/08/2017 06:57:26] - Overall Result for Device: /dev/sg1 ****** FAIL ******
