Starting command:[/home/Nansen/Downloads/soft/SF_Genesis -PROCESS_SSD 0:0:0:0 "/home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/FW_PPRO_5_8_2_Release.906190.release.123456.mfp" "/home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/Configuration_Files/22214.123456.edriveconfig" 123 456 LOG="/home/Nansen/Downloads/123_localhost.localdomain_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log" ]...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 08/03/2017 14:06:44] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/FW_PPRO_5_8_2_Release.906190.release.123456.mfp
argv[4]: /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/Configuration_Files/22214.123456.edriveconfig
argv[5]: 123
argv[6]: 456
argv[7]: LOG=/home/Nansen/Downloads/123_localhost.localdomain_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 08/03/2017 14:06:44] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Thu 08/03/2017 14:06:49] - Issuing a discovery command for device: '0:0:0:0'
[Thu 08/03/2017 14:06:55] - Discovery command completed...
[Thu 08/03/2017 14:06:55] - Waiting 5 seconds for the system to settle...
[Thu 08/03/2017 14:07:00] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Thu 08/03/2017 14:07:00] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/FW_PPRO_5_8_2_Release.906190.release.123456.mfp
Configuration File = /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/Configuration_Files/22214.123456.edriveconfig
Serial No. = 123
World Wide Name = 456
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 08/03/2017 14:07:00] - Successfully received the IDENTIFY data from the drive...
[Thu 08/03/2017 14:07:00] - Validating Manufacturing Firmware Package: /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/FW_PPRO_5_8_2_Release.906190.release.123456.mfp
[Thu 08/03/2017 14:07:05] - Successfully opened the package: /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/FW_PPRO_5_8_2_Release.906190.release.123456.mfp
[Thu 08/03/2017 14:07:05] - File : /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/Configuration_Files/22214.123456.edriveconfig in processing ...
[Thu 08/03/2017 14:07:05] - file /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/Configuration_Files/22214.123456.edriveconfig Loaded successfully
[Thu 08/03/2017 14:07:05] - Warning: Unable to query diagnostics information to perform power management settings check
[Thu 08/03/2017 14:07:05] - B01 Power Management configuration request detected
[Thu 08/03/2017 14:07:05] - Successfully extracted *.DriveConfig file: /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/Configuration_Files/22214.123456.edriveconfig
[Thu 08/03/2017 14:07:05] - Extracted Config_ID: 1 (22214) in DriveConfig file: /home/Nansen/Downloads/FW_PPRO_5_8_2_Release.906190.release--123456/Configuration_Files/22214.123456.edriveconfig
[Thu 08/03/2017 14:07:05] - Extracted SerialOutputControl: 0
[Thu 08/03/2017 14:07:05] - Searching for flashware image for configuration 22214
[Thu 08/03/2017 14:07:05] - Manifest found for configuration 22214
[Thu 08/03/2017 14:07:05] - Flashware image extracted: 22214_fw_cl_mlc_Micron_64Gb_MT29F64G08CBAAAWP_2Q_1C_1D_PP_R00751_s512.vic
[Thu 08/03/2017 14:07:05] - Searching for manufacturing image for configuration 22214
[Thu 08/03/2017 14:07:05] - Manifest found for configuration 22214
[Thu 08/03/2017 14:07:05] - Manufacturing image extracted: 22214_mf_mlc_Micron_64Gb_MT29F64G08CBAAAWP_2Q_1C_1D_PP_R00751_s512.vic
[Thu 08/03/2017 14:07:05] - Proceeding in ROM mode, download feature 3...
[Thu 08/03/2017 14:07:05] - Successfully downloaded MFB to the drive...
[Thu 08/03/2017 14:07:05] - Waiting (5 sec) for the drive to settle...
[Thu 08/03/2017 14:07:10] - Successfully received the IDENTIFY data from the drive...
[Thu 08/03/2017 14:07:10] - Firmware revision reported to be: '582ABBM0'. This indicates MFB download was successful.
[Thu 08/03/2017 14:07:10] - Successfully enabled SMART capabilities...
[Thu 08/03/2017 14:07:12] - Successfully issued a diagnostic unlock...
[Thu 08/03/2017 14:07:14] - Performing the flash test of block 0 (0x0000)...
[Thu 08/03/2017 14:07:15] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 1
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0374 | N4,N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 8
Number of failures: 8
Number of Passed with warnings: 0
No. Passed without warnings: 0
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 08/03/2017 14:07:15] - End of Genesis manufacturing log.
[Thu 08/03/2017 14:07:15] - Exiting...
[Thu 08/03/2017 14:07:15] - Overall Result for Device: /dev/sg0 ****** FAIL ******
Process exited with code 7
上面的Flash TEST有问题,一般是什么情况? [ 此帖被nymz在2017-08-03 15:19重新编辑 ]
