１２０Ｇ ＯＣＺ掉盘了就想从新开卡，但是总是刷不了固件。。。。。
另外这盘的Ｆ是大Ｓ ＰＦ４１２ ＡＬ，我用老固件22214 ＳＦ－２２８１ １２０ＧＢ Ｍｉｃｒｏｎ２５ ＭＬＣ ＴＳＯＰ １６ｘＭＴ２９Ｆ６４Ｇ０８ＣＢＡＡＡＷＰ，这个是对的么？
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝[Sun 05/03/2015 10:23:30] - Instructing the operating system to purge any existing cached data for device: '1:0:0:0'
[Sun 05/03/2015 10:23:35] - Issuing a discovery command for device: '1:0:0:0'
[Sun 05/03/2015 10:23:42] - Discovery command completed...
[Sun 05/03/2015 10:23:42] - Waiting 5 seconds for the system to settle...
[Sun 05/03/2015 10:23:47] - Device designation string '1:0:0:0' is mapped to node '/dev/sg1'
[Sun 05/03/2015 10:23:47] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg1
MFP Package Filename = /MPT/FW_SF-2000_MP_5-0-7_Client--1234/FW_SF-2000_MP_5-0-7_Client.1234.mfp
Configuration File = /SOFT/22214.1234.V507.driveconfig
Serial No. = 11114
World Wide Name = 11114
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 05/03/2015 10:23:47] - Successfully received the IDENTIFY data from the drive...
[Sun 05/03/2015 10:23:47] - Validating Manufacturing Firmware Package: /MPT/FW_SF-2000_MP_5-0-7_Client--1234/FW_SF-2000_MP_5-0-7_Client.1234.mfp
[Sun 05/03/2015 10:24:04] - Successfully opened the package: /MPT/FW_SF-2000_MP_5-0-7_Client--1234/FW_SF-2000_MP_5-0-7_Client.1234.mfp
[Sun 05/03/2015 10:24:04] - file /SOFT/22214.1234.V507.driveconfig Loaded successfully
[Sun 05/03/2015 10:24:04] - Warning: Unable to query diagnostics information to perform power management settings check
[Sun 05/03/2015 10:24:04] - B01 Power Management configuration request detected
[Sun 05/03/2015 10:24:04] - Successfully extracted *.DriveConfig file: /SOFT/22214.1234.V507.driveconfig
[Sun 05/03/2015 10:24:04] - Extracted Config_ID: 1 (22214) in DriveConfig file: /SOFT/22214.1234.V507.driveconfig
[Sun 05/03/2015 10:24:04] - Extracted SerialOutputControl: 0
[Sun 05/03/2015 10:24:04] - Searching for flashware image for configuration 22214
[Sun 05/03/2015 10:24:04] - Manifest found for configuration 22214
[Sun 05/03/2015 10:24:04] - Flashware image extracted: 22214_fw_cl_mlc_Micron_64Gb_MT29F64G08CBAAAWP_2Q_1C_1D_PP_R00751_s512.vic
[Sun 05/03/2015 10:24:04] - Searching for manufacturing image for configuration 22214
[Sun 05/03/2015 10:24:04] - Manifest found for configuration 22214
[Sun 05/03/2015 10:24:04] - Manufacturing image extracted: 22214_mf_mlc_Micron_64Gb_MT29F64G08CBAAAWP_2Q_1C_1D_PP_R00751_s512.vic
[Sun 05/03/2015 10:24:04] - Proceeding in ROM mode, download feature 3...
[Sun 05/03/2015 10:25:10] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 1 (0x01) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 224 (0xE0) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 545.671762] sd 1:0:0:0: [sdb] Add. Sense: No additional sense information
[ 545.671803] ata2.00: disabled
[ 550.668381] ata2.00: hard resetting link
[ 550.972155] ata2.01: hard resetting link
[ 551.977882] ata2.01: failed to resume link (SControl 0)
[ 552.128764] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 552.128779] ata2.01: SATA link down (SStatus 0 SControl 0)
[ 552.129051] ata2.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[ 552.129055] ata2.00: 64 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 552.132007] ata2.00: configured for UDMA/133
[ 552.132018] ata2: EH complete
[ 552.132169] scsi 1:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
[ 552.136601] sd 1:0:0:0: [sdb] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 552.136605] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 552.136662] sd 1:0:0:0: [sdb] Write Protect is off
[ 552.136666] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 552.136689] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 552.137519] sdb:
[ 552.137866] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 552.146856] unknown partition table
[ 552.147785] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 585.655010] ata2: lost interrupt (Status 0x58)
[ 585.655030] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 585.655046] ata2.00: failed command: DOWNLOAD MICROCODE
[ 585.655051] ata2.00: cmd 92/03:80:00:00:00/00:00:00:00:00/00 tag 0 pio 65536 out
[ 585.655053] res 40/00:01:e0:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 585.655055] ata2.00: status: { DRDY }
[ 585.655064] ata2.00: hard resetting link
[ 585.959440] ata2.01: hard resetting link
[ 586.965128] ata2.01: failed to resume link (SControl 0)
[ 592.158485] ata2.00: link is slow to respond, please be patient (ready=0)
[ 595.672987] ata2.00: SRST failed (errno=-16)
[ 595.672997] ata2.00: hard resetting link
[ 595.977600] ata2.01: hard resetting link
[ 596.983327] ata2.01: failed to resume link (SControl 0)
[ 602.176682] ata2.00: link is slow to respond, please be patient (ready=0)
[ 605.691182] ata2.00: SRST failed (errno=-16)
[ 605.691193] ata2.00: hard resetting link
[ 605.995789] ata2.01: hard resetting link
[ 607.001495] ata2.01: failed to resume link (SControl 0)
[ 612.194862] ata2.00: link is slow to respond, please be patient (ready=0)
[ 640.667450] ata2.00: SRST failed (errno=-16)
[ 640.667464] ata2.00: hard resetting link
[ 640.972054] ata2.01: hard resetting link
[ 641.977759] ata2.01: failed to resume link (SControl 0)
[ 645.694015] ata2.00: SRST failed (errno=-16)
[ 645.694021] ata2.00: reset failed, giving up
[ 645.694024] ata2.00: disabled
[ 645.694049] ata2: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 05/03/2015 10:25:10] - End of Genesis manufacturing log.
[Sun 05/03/2015 10:25:10] - Exiting...
[ 此帖被demiurge3141在2015-05-03 12:45重新编辑 ]
