<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Sun, 04/03/2016 @ 23:58:58
End Time: Mon, 04/04/2016 @ 00:00:22
OverallResult: FAIL
ExitCode: (0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
argv[4]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/22824.0.driveconfig
argv[5]: Tigo
argv[6]: s500
argv[7]: 120G
argv[8]: LOG=/root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/Tigo s500_localhost.localdomain_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
Log File: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/Tigo s500_localhost.localdomain_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
Hostname: localhost.localdomain
Host IP Address: 127.0.0.1
Port Number: 0
DeviceName: /dev/sg0
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 04/03/2016 23:58:58] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
argv[4]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/22824.0.driveconfig
argv[5]: Tigo
argv[6]: s500
argv[7]: 120G
argv[8]: LOG=/root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/Tigo s500_localhost.localdomain_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 04/03/2016 23:58:58] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Sun 04/03/2016 23:59:03] - Issuing a discovery command for device: '0:0:0:0'
[Sun 04/03/2016 23:59:08] - Discovery command completed...
[Sun 04/03/2016 23:59:08] - Waiting 5 seconds for the system to settle...
[Sun 04/03/2016 23:59:13] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Sun 04/03/2016 23:59:13] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
Configuration File = /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/22824.0.driveconfig
Serial No. = Tigo
World Wide Name = s500
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 04/03/2016 23:59:13] - Successfully received the IDENTIFY data from the drive...
[Sun 04/03/2016 23:59:13] - Validating Manufacturing Firmware Package: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Sun 04/03/2016 23:59:16] - Successfully opened the package: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Sun 04/03/2016 23:59:16] - file /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/22824.0.driveconfig Loaded successfully
[Sun 04/03/2016 23:59:16] - Warning: Unable to query diagnostics information to perform power management settings check
[Sun 04/03/2016 23:59:16] - B01 Power Management configuration request detected
[Sun 04/03/2016 23:59:16] - Successfully extracted *.DriveConfig file: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/22824.0.driveconfig
[Sun 04/03/2016 23:59:16] - Extracted Config_ID: 1 (22824) in DriveConfig file: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/22824.0.driveconfig
[Sun 04/03/2016 23:59:16] - Extracted SerialOutputControl: 0
[Sun 04/03/2016 23:59:16] - Searching for flashware image for configuration 22824
[Sun 04/03/2016 23:59:16] - Manifest found for configuration 22824
[Sun 04/03/2016 23:59:16] - Flashware image extracted: 22824_fw_cl_slc_Intel_64Gb_PF29F64G16MCNE_2Q_2C_1D_PP_R00800_s512.vic
[Sun 04/03/2016 23:59:16] - Searching for manufacturing image for configuration 22824
[Sun 04/03/2016 23:59:16] - Manifest found for configuration 22824
[Sun 04/03/2016 23:59:16] - Manufacturing image extracted: 22824_mf_slc_Intel_64Gb_PF29F64G16MCNE_2Q_2C_1D_PP_R00800_s512.vic
[Sun 04/03/2016 23:59:16] - Proceeding in ROM mode, download feature 3...
[Mon 04/04/2016 00:00:22] - FATAL_ERROR: Could not download MFB to the drive...(0x11000001:SF_SG_DEVICE_CHECK_CONDITION_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended Error data:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ATA COMMAND : 0x0092 (146)
ATA FEATURE : 0x0003 (3)
Device Status: 0x0001 (1)
Driver Status: 0x0000 (0)
Host Status: 0x0008 (8)
~~~~~~~~~~~~~~
Sense Data:
~~~~~~~~~~~~~~
0 - No Sense: 114 (0x72) OK
1 - Recovered Error: 11 (0x0B) FAIL
2 - Not Ready: 0 (0x00) OK
3 - Medium Error: 0 (0x00) OK
4 - Hardware Error: 0 (0x00) OK
5 - Illegal Request: 0 (0x00) OK
6 - Unit Attention: 0 (0x00) OK
7 - Data Protect: 14 (0x0E) OK
8 - Blank Check: 9 (0x09) OK
9 - Vendor Specific: 12 (0x0C) OK
10 - Copy Aborted: 0 (0x00) OK
11 - Aborted Command: 0 (0x00) OK
12 - Equal Comparison: 0 (0x00) NA
13 - Volume Overflow: 0 (0x00) NA
14 - Miscompare: 0 (0x00) OK
15 - Reserved: 128 (0x80) NA
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System Trace:
~~~~~~~~~~~~~~~~
[ 146.457602] ata1.00: failed command: STANDBY IMMEDIATE
[ 146.457610] ata1.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 146.457611] res 51/04:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 146.457616] ata1.00: status: { DRDY ERR }
[ 146.457619] ata1.00: error: { ABRT }
[ 146.457628] ata1.00: device reported invalid CHS sector 0
[ 146.457643] sd 0:0:0:0: [sda] START_STOP FAILED
[ 146.457646] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 146.457651] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 146.457657] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 146.457750] ata1.00: disabled
[ 151.461426] ata1: hard resetting link
[ 151.766031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 151.767017] ata1.00: ATA-8: SandForce{200026BB}, 20DABBR0, max UDMA/133
[ 151.767022] ata1.00: 64 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 151.772691] ata1.00: configured for UDMA/133
[ 151.772699] ata1: EH complete
[ 151.772828] scsi 0:0:0:0: Direct-Access ATA SandForce{200026 20DA PQ: 0 ANSI: 5
[ 151.774267] sd 0:0:0:0: [sda] 64 512-byte logical blocks: (32.7 kB/32.0 KiB)
[ 151.774271] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 151.774348] sd 0:0:0:0: [sda] Write Protect is off
[ 151.774352] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 151.774386] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 151.775674] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 151.776296] sda: unknown partition table
[ 151.785881] sd 0:0:0:0: [sda] Attached SCSI disk
[ 170.712028] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 170.712035] ata1.00: failed command: DOWNLOAD MICROCODE
[ 170.712043] ata1.00: cmd 92/03:21:00:00:02/00:00:00:00:00/00 tag 0 pio 16896 out
[ 170.712045] res 40/00:00:80:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
[ 170.712049] ata1.00: status: { DRDY }
[ 170.712057] ata1: hard resetting link
[ 176.066026] ata1: link is slow to respond, please be patient (ready=0)
[ 180.758027] ata1: COMRESET failed (errno=-16)
[ 180.758034] ata1: hard resetting link
[ 186.112028] ata1: link is slow to respond, please be patient (ready=0)
[ 190.804021] ata1: COMRESET failed (errno=-16)
[ 190.804028] ata1: hard resetting link
[ 196.158024] ata1: link is slow to respond, please be patient (ready=0)
[ 225.840028] ata1: COMRESET failed (errno=-16)
[ 225.840037] ata1: limiting SATA link speed to 1.5 Gbps
[ 225.840040] ata1: hard resetting link
[ 230.888019] ata1: COMRESET failed (errno=-16)
[ 230.888026] ata1: reset failed, giving up
[ 230.888030] ata1.00: disabled
[ 230.888052] ata1: EH complete
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 04/04/2016 00:00:22] - End of Genesis manufacturing log.
[Mon 04/04/2016 00:00:22] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Sun, 04/03/2016 @ 23:58:58 </Start_Time>
<End_Time> Mon, 04/04/2016 @ 00:00:22 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090014:SF_GENESIS_FW_DOWNLOAD_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
argv[4]: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/22824.0.driveconfig
argv[5]: Tigo
argv[6]: s500
argv[7]: 120G
argv[8]: LOG=/root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/Tigo s500_localhost.localdomain_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
</Input_Parameters>
<Log_File> /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/Tigo s500_localhost.localdomain_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log </Log_File>
<Hostname> localhost.localdomain </Hostname>
<Host_IP_Address> 127.0.0.1 </Host_IP_Address>
<Port_Number> 0 </Port_Number>
<Device_Name> /dev/sg0 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Mon 04/04/2016 00:00:22] - Overall Result for Device: /dev/sg0 ****** FAIL ******
