最近在坛友处购买了一片建兴128G mSATA一片(颗粒是TH58TEG8DDJBA8C)，由于没有mSATA接口，所以不知好坏，正好手头有一片SF2281的板子，拆颗粒上SF2281
拆颗粒
颗粒 植珠
准备DIY SF2281板
焊好颗粒
开卡一次成功
颗粒不错全部PASS
~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
Configuration File = /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27336.0.driveconfig
Serial No. = 20160609
World Wide Name = 881979
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Thu 06/09/2016 20:11:31] - Successfully received the IDENTIFY data from the drive...
[Thu 06/09/2016 20:11:31] - Validating Manufacturing Firmware Package: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Thu 06/09/2016 20:11:48] - Successfully opened the package: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/FW_PPRO_5_2_2_Release.672199.release.0.mfp
[Thu 06/09/2016 20:11:48] - file /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27336.0.driveconfig Loaded successfully
[Thu 06/09/2016 20:11:48] - Warning: Unable to query diagnostics information to perform power management settings check
[Thu 06/09/2016 20:11:48] - B01 Power Management configuration request detected
[Thu 06/09/2016 20:11:48] - Successfully extracted *.DriveConfig file: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27336.0.driveconfig
[Thu 06/09/2016 20:11:48] - Extracted Config_ID: 1 (27336) in DriveConfig file: /root/mpt/FW_PPRO_5_2_2_Release.672199.release--0/27336.0.driveconfig
[Thu 06/09/2016 20:11:48] - Extracted SerialOutputControl: 0
[Thu 06/09/2016 20:11:48] - Searching for flashware image for configuration 27336
[Thu 06/09/2016 20:11:48] - Manifest found for configuration 27336
[Thu 06/09/2016 20:11:48] - Flashware image extracted: 27336_fw_cl_mlc_Toshiba_64Gb_TH58TEG7DDJBA4C_2Q_2C_1D_PP_R01406_s512.vic
[Thu 06/09/2016 20:11:48] - Searching for manufacturing image for configuration 27336
[Thu 06/09/2016 20:11:48] - Manifest found for configuration 27336
[Thu 06/09/2016 20:11:48] - Manufacturing image extracted: 27336_mf_mlc_Toshiba_64Gb_TH58TEG7DDJBA4C_2Q_2C_1D_PP_R01406_s512.vic
[Thu 06/09/2016 20:11:48] - Proceeding in ROM mode, download feature 3...
[Thu 06/09/2016 20:11:48] - Successfully downloaded MFB to the drive...
[Thu 06/09/2016 20:11:48] - Waiting (5 sec) for the drive to settle...
[Thu 06/09/2016 20:11:53] - Successfully received the IDENTIFY data from the drive...
[Thu 06/09/2016 20:11:53] - Firmware revision reported to be: '522ABBM0'. This indicates MFB download was successful.
[Thu 06/09/2016 20:11:53] - Successfully enabled SMART capabilities...
[Thu 06/09/2016 20:11:55] - Successfully issued a diagnostic unlock...
[Thu 06/09/2016 20:11:56] - Performing the flash test of block 0 (0x0000)...
[Thu 06/09/2016 20:11:58] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 2
Chip Enabled Count: 2
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 0 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 0 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 1 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 2 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
| 1 | 1 | 0 | 3 | 0x0001 | N1 | PASS |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 16
Number of failures: 0
Number of Passed with warnings: 0
No. Passed without warnings: 16
-----------------------------------------------------------------------------
在SATAⅡ测试
完工！
[ 此帖被llm2323在2016-06-10 05:48重新编辑 ]
