Starting command:[/root/soft/SF_Genesis-v1.7.0.01020130612-fc14-32bit/SF_Genesis -PROCESS_SSD 0:0:0:0 "/root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/FW_SF-2000_B01_MP1-refresh_3-1-9.0.mfp" "/root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/21114.0.1.driveconfig" 1 1 LOG="/root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/1_0_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log" ]...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 04/22/2018 09:57:08] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 0:0:0:0
argv[3]: /root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/FW_SF-2000_B01_MP1-refresh_3-1-9.0.mfp
argv[4]: /root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/21114.0.1.driveconfig
argv[5]: 1
argv[6]: 1
argv[7]: LOG=/root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/1_0_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 04/22/2018 09:57:08] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'
[Sun 04/22/2018 09:57:13] - Issuing a discovery command for device: '0:0:0:0'
[Sun 04/22/2018 09:57:19] - Discovery command completed...
[Sun 04/22/2018 09:57:19] - Waiting 5 seconds for the system to settle...
[Sun 04/22/2018 09:57:24] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'
[Sun 04/22/2018 09:57:24] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg0
MFP Package Filename = /root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/FW_SF-2000_B01_MP1-refresh_3-1-9.0.mfp
Configuration File = /root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/21114.0.1.driveconfig
Serial No. = 1
World Wide Name = 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 04/22/2018 09:57:24] - Successfully received the IDENTIFY data from the drive...
[Sun 04/22/2018 09:57:24] - Validating Manufacturing Firmware Package: /root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/FW_SF-2000_B01_MP1-refresh_3-1-9.0.mfp
[Sun 04/22/2018 09:57:32] - Successfully opened the package: /root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/FW_SF-2000_B01_MP1-refresh_3-1-9.0.mfp
[Sun 04/22/2018 09:57:32] - file /root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/21114.0.1.driveconfig Loaded successfully
[Sun 04/22/2018 09:57:32] - Warning: Unable to query diagnostics information to perform power management settings check
[Sun 04/22/2018 09:57:32] - B01 Power Management configuration request detected
[Sun 04/22/2018 09:57:32] - Successfully extracted *.DriveConfig file: /root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/21114.0.1.driveconfig
[Sun 04/22/2018 09:57:32] - Extracted Config_ID: 1 (21114) in DriveConfig file: /root/mpt/FW_SF-2000_B01_MP1-refresh_3-1-9--0/21114.0.1.driveconfig
[Sun 04/22/2018 09:57:32] - Extracted SerialOutputControl: 0
[Sun 04/22/2018 09:57:32] - Searching for flashware image for configuration 21114
[Sun 04/22/2018 09:57:32] - Manifest found for configuration 21114
[Sun 04/22/2018 09:57:32] - Flashware image extracted: 21114_fw_cl_mlc_Intel_64Gb_JS29F16B08CAME1_1Q_2C_1D_PP_R00691_s512.vic
[Sun 04/22/2018 09:57:32] - Searching for manufacturing image for configuration 21114
[Sun 04/22/2018 09:57:32] - Manifest found for configuration 21114
[Sun 04/22/2018 09:57:32] - Manufacturing image extracted: 21114_mf_mlc_Intel_64Gb_JS29F16B08CAME1_1Q_2C_1D_PP_R00691_s512.vic
[Sun 04/22/2018 09:57:32] - Proceeding in ROM mode, download feature 3...
[Sun 04/22/2018 09:57:32] - Successfully downloaded MFB to the drive...
[Sun 04/22/2018 09:57:32] - Waiting (5 sec) for the drive to settle...
[Sun 04/22/2018 09:57:37] - Successfully received the IDENTIFY data from the drive...
[Sun 04/22/2018 09:57:37] - Firmware revision reported to be: '319ABBM0'. This indicates MFB download was successful.
[Sun 04/22/2018 09:57:37] - Successfully enabled SMART capabilities...
[Sun 04/22/2018 09:57:39] - Successfully issued a diagnostic unlock...
[Sun 04/22/2018 09:57:40] - Performing the flash test of block 0 (0x0000)...
[Sun 04/22/2018 09:57:42] - Flash Test Results:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------------------------------------------------------------------------
Flash Test Parameters:
-----------------------------------------------------------------------------
Block Count: 0
Page Count: 1
Bus Count: 1
Chip Enabled Count: 2
Die Count: 1
Lane Count: 4
Plane Count: 2
-----------------------------------------------------------------------------
Results Notes:
-----------------------
N1 - At least one page tested and passed with no bit errors.
N2 - No test data available. Test may have aborted, or failed during the testing.
N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.
N4 - At least one erased page tested had bit error rate greater than half the correction power.
N5 - Walking zeros test failed.
N6 - Walking ones test failed.
N7 - Block contained factory bad block markings and testing was skipped.
N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.
N9 - Block in plane 0 was marked as a factory bad block.
N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.
N11 - Block in plane 1 was marked as a factory bad block.
-----------------------------------------------------------------------------
+------+------+------+------+--------+--------------------------------------------+---------+
| Bus | CE | Die | Lane | Value | Result Notes | Overall |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 1 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 0 | 0 | 3 | 0x0364 | N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 0 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 1 | 0x0042 | N3,N6 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 2 | 0x0002 | N3 | WARNING |
+------+------+------+------+--------+--------------------------------------------+---------+
| 0 | 1 | 0 | 3 | 0x0364 | N5,N6,N8,N10 | FAIL |
+------+------+------+------+--------+--------------------------------------------+---------+
-----------------------------------------------------------------------------
Total Number of test results: 8
Number of failures: 2
Number of Passed with warnings: 6
No. Passed without warnings: 0
-----------------------------------------------------------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Sun 04/22/2018 09:57:42] - End of Genesis manufacturing log.
[Sun 04/22/2018 09:57:42] - Exiting...
[Sun 04/22/2018 09:57:42] - Overall Result for Device: /dev/sg0 ****** FAIL ******
Process exited with code 7
英特尔SF2281的板子和JS29F16B08CAM1芯片
[ 此帖被moshuai2013在2018-04-22 11:34重新编辑 ]
