RT；一块金士顿SV300,主控2281，想重新开卡试试，但总是卡在27%的位置！提示的是没有接收到正确的固件！求大神支招
<?xml version = "1.0"?>
<Genesis_Log>
<Log_Body>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Overall Summary:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Start Time: Mon, 01/29/2018 @ 20:41:00
End Time: Mon, 01/29/2018 @ 20:41:38
OverallResult: FAIL
ExitCode: (0x10090012:SF_GENESIS_IDENTIFY_ERROR)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Environment Settings:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Input Parameters:
argv[1]: -PROCESS_SSD
argv[2]: 6:0:0:0
argv[3]: /home/linux/Desktop/mpt/FW_PPRO_6_0_A_Release.1134440.release--123456/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
argv[4]: /home/linux/Desktop/33174.123456.driveconfig
argv[5]: 123
argv[6]: 123
argv[7]: LOG=/home/linux/Desktop/log/123_linux-pc_DATETIMESTAMP_6.0.0.0_PROCESS_SSD_RESULT.log
Log File: /home/linux/Desktop/log/123_linux-pc_DATETIMESTAMP_6.0.0.0_PROCESS_SSD_RESULT.log
Hostname: linux-pc
Host IP Address: 127.0.1.1
Port Number: 2
DeviceName: /dev/sg2
SF_Genesis Version: v1.7.0.01020130612-fc14-32bit
SF_Core Library Version: v1.7.1.20130612-fc14-32bit
SF_OS_Information: Linux 4.4.0-2-deepin-686-pae #1 SMP Deepin 4.4.6-4 (2016-07-01) i686
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post Processing Device Information:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WWN OUI: UNKNOWN
WWN UniqueID: UNKNOWN
Serial No.: UNKNOWN
Model No.: UNKNOWN
Firmware Revision: UNKNOWN
ROM Revision: UNKNOWN
NAND Page Size: UNKNOWN
Number Of Chip Enable: UNKNOWN
Logical Sectors: UNKNOWN
NAND ID: UNKNOWN
Flash Manufacturer: UNKNOWN
Flash Device: UNKNOWN
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.01020130612-fc14-32bit
SF_Core Library: v1.7.1.20130612-fc14-32bit
Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 01/29/2018 20:41:00] - SF_Genesis has been invoked with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
argv[1]: -PROCESS_SSD
argv[2]: 6:0:0:0
argv[3]: /home/linux/Desktop/mpt/FW_PPRO_6_0_A_Release.1134440.release--123456/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
argv[4]: /home/linux/Desktop/33174.123456.driveconfig
argv[5]: 123
argv[6]: 123
argv[7]: LOG=/home/linux/Desktop/log/123_linux-pc_DATETIMESTAMP_6.0.0.0_PROCESS_SSD_RESULT.log
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 01/29/2018 20:41:00] - Instructing the operating system to purge any existing cached data for device: '6:0:0:0'
[Mon 01/29/2018 20:41:05] - Issuing a discovery command for device: '6:0:0:0'
[Mon 01/29/2018 20:41:10] - Discovery command completed...
[Mon 01/29/2018 20:41:10] - Waiting 5 seconds for the system to settle...
[Mon 01/29/2018 20:41:15] - Device designation string '6:0:0:0' is mapped to node '/dev/sg2'
[Mon 01/29/2018 20:41:15] - Proceeding to process SSD device with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DeviceName = /dev/sg2
MFP Package Filename = /home/linux/Desktop/mpt/FW_PPRO_6_0_A_Release.1134440.release--123456/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
Configuration File = /home/linux/Desktop/33174.123456.driveconfig
Serial No. = 123
World Wide Name = 123
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Mon 01/29/2018 20:41:15] - Successfully received the IDENTIFY data from the drive...
[Mon 01/29/2018 20:41:15] - Validating Manufacturing Firmware Package: /home/linux/Desktop/mpt/FW_PPRO_6_0_A_Release.1134440.release--123456/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
[Mon 01/29/2018 20:41:31] - Successfully opened the package: /home/linux/Desktop/mpt/FW_PPRO_6_0_A_Release.1134440.release--123456/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
[Mon 01/29/2018 20:41:31] - file /home/linux/Desktop/33174.123456.driveconfig Loaded successfully
[Mon 01/29/2018 20:41:32] - B01 Power Management configuration request detected
[Mon 01/29/2018 20:41:32] - Warning: Applying B01 Power Management settings to a device with hardware version 0x500026BB
[Mon 01/29/2018 20:41:32] - Successfully extracted *.DriveConfig file: /home/linux/Desktop/33174.123456.driveconfig
[Mon 01/29/2018 20:41:32] - Extracted Config_ID: 1 (33174) in DriveConfig file: /home/linux/Desktop/33174.123456.driveconfig
[Mon 01/29/2018 20:41:32] - Extracted SerialOutputControl: 0
[Mon 01/29/2018 20:41:33] - Searching for flashware image for configuration 33174
[Mon 01/29/2018 20:41:33] - Manifest found for configuration 33174
[Mon 01/29/2018 20:41:33] - Flashware image extracted: 33174_fw_cl_mlc_MIC_128Gb_29bit_FT16B08UCM1-34_2Q_1C_1D_PP_R02726_s512.vic
[Mon 01/29/2018 20:41:33] - Searching for manufacturing image for configuration 33174
[Mon 01/29/2018 20:41:33] - Manifest found for configuration 33174
[Mon 01/29/2018 20:41:33] - Manufacturing image extracted: 33174_mf_mlc_MIC_128Gb_29bit_FT16B08UCM1-34_2Q_1C_1D_PP_R02726_s512.vic
[Mon 01/29/2018 20:41:33] - Proceeding in non-ROM mode, Download feature 3...
[Mon 01/29/2018 20:41:33] - Successfully downloaded MFB to the drive...
[Mon 01/29/2018 20:41:33] - Waiting (5 sec) for the drive to settle...
[Mon 01/29/2018 20:41:38] - Successfully received the IDENTIFY data from the drive...
[Mon 01/29/2018 20:41:38] - FATAL_ERROR: Did not recieve the correct firmware revision. it is reported to be: '60AABBF0', indicating MFB download has failed.
[Mon 01/29/2018 20:41:38] - End of Genesis manufacturing log.
[Mon 01/29/2018 20:41:38] - Exiting...
</Log_Body>
<Overall_Summary>
<Start_Time> Mon, 01/29/2018 @ 20:41:00 </Start_Time>
<End_Time> Mon, 01/29/2018 @ 20:41:38 </End_Time>
<Overall_Result> FAIL </Overall_Result>
<Exit_Code> (0x10090012:SF_GENESIS_IDENTIFY_ERROR) </Exit_Code>
</Overall_Summary>
<Environment_Settings>
<Input_Parameters>
argv[1]: -PROCESS_SSD
argv[2]: 6:0:0:0
argv[3]: /home/linux/Desktop/mpt/FW_PPRO_6_0_A_Release.1134440.release--123456/FW_PPRO_6_0_A_Release.1134440.release.123456.mfp
argv[4]: /home/linux/Desktop/33174.123456.driveconfig
argv[5]: 123
argv[6]: 123
argv[7]: LOG=/home/linux/Desktop/log/123_linux-pc_DATETIMESTAMP_6.0.0.0_PROCESS_SSD_RESULT.log
</Input_Parameters>
<Log_File> /home/linux/Desktop/log/123_linux-pc_DATETIMESTAMP_6.0.0.0_PROCESS_SSD_RESULT.log </Log_File>
<Hostname> linux-pc </Hostname>
<Host_IP_Address> 127.0.1.1 </Host_IP_Address>
<Port_Number> 2 </Port_Number>
<Device_Name> /dev/sg2 </Device_Name>
<SF_Genesis_Version> v1.7.0.01020130612-fc14-32bit </SF_Genesis_Version>
<SF_Core_Library_Version> v1.7.1.20130612-fc14-32bit </SF_Core_Library_Version>
<SF_OS_Information> Linux 4.4.0-2-deepin-686-pae #1 SMP Deepin 4.4.6-4 (2016-07-01) i686 </SF_OS_Information>
</Environment_Settings>
<Post_Processing_Device_Info>
<WWN_OUI> UNKNOWN </WWN_OUI>
<WWN_UniqueID> UNKNOWN </WWN_UniqueID>
<Serial_Number> UNKNOWN </Serial_Number>
<Model_Number> UNKNOWN </Model_Number>
<Firmware_Revision> UNKNOWN </Firmware_Revision>
<ROM_Revision> UNKNOWN </ROM_Revision>
<NAND_Page_Size> UNKNOWN </NAND_Page_Size>
<Number_Of_Chip_Enable> UNKNOWN </Number_Of_Chip_Enable>
<Logical_Sectors> UNKNOWN </Logical_Sectors>
<NAND_ID> UNKNOWN </NAND_ID>
<Flash_Manufacturer> UNKNOWN </Flash_Manufacturer>
<Flash_Device> UNKNOWN </Flash_Device>
</Post_Processing_Device_Info>
</Genesis_Log>
[Mon 01/29/2018 20:41:38] - Overall Result for Device: /dev/sg2 ****** FAIL ******
