我在用USB Mass Production Test(m) 2.094制作启动盘的时候总是出错。错误为Error8 。我把其中的报告复制了出来
Starting Time: 18:49:54
Device 1:0xA3
Random delay 0 msec
Flash ID:89-D5-94-3E-74
Intel/Micron Flash
Hynix/ST/Intel/Micron Flash 05-E0 must be OFF
==> Check SORTING TABLE ...
Sorting Info: 0-0FFF, Solid State System, Flash Sorting Kit V3.0-KTC(2008-01-09)(2 defect table mode)
==> Using Sortig Table (4075).
Flash ID:89-D5-94-3E-74
Intel/Micron Flash
Hynix/ST/Intel/Micron Flash 05-E0 must be OFF
--> Erase All Block Activated.
Total good blocks after SCAN: 4075 / 4096
Activate 6677A2-Intel/Micron workaround
parameter 2-Plane = 1,0
PreFormat Option=ID1,255,80,0,1,0,0,5-S111-T0000
=>Extra reserved block = 5
=>Max Card Size Enable, Bad Block Allowed=21(21)
Data block = 3988 / 86 / 4096
RootSector=0x234,ClusterOffset=1452,Sec/Cluster=64,Boundary=2048
Enable gDIRC:
Save SETTING to 003FF458
Write CIS data.
Low Level Format DONE
Store ERROR MSG to Block-0x0FFF.
=A3=> ................................
Total=4083711,PublicArea=4083583, SecureArea=0
Create SECURE(CDROM=0,Public=1993 MB,Secure=0 MB)
--- T2 start ---
FW version is: 0xA3
Vendor ID is:0x0951
Product ID is:0x1613
Vendor=Kingston
Product=DataTraveler2.0
Device capacity : 0 > 20417 > 0
DOS Volume=KINGSTON
Device is formatted.
--- T2 is done ---
Total Capacity: 4083711 sectors, 1993 MBytes
Elasped Time = 00:00:30
Ending Time: 18:50:24
我是没辙了，请哪位有本事的朋友帮帮忙吧，看看怎么解决，先谢谢啦。
