切换到宽版
爱科技/爱创意/爱折腾;电子/数码爱好者的家!欢迎访问新版数码之家网站
  • 1927阅读
  • 9回复

[SandForce]SF2582东芝16贴7S2F [复制链接]

上一主题 下一主题
 

发帖
22
M币
38
专家
0
粉丝
2

Starting command:[/root/soft/SF_Genesis-v1.7.5.00620140820-fc14-32bit/SF_Genesis -PROCESS_SSD 23:0:0:0 "/root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/FW_PPRO_6_1_8_Release.1115287.release.123456.mfp" "/root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/25139.123456.driveconfig" 399205758 399205758  LOG="/root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/399205758_Linux_DATETIMESTAMP_23.0.0.0_PROCESS_SSD_RESULT.log"   ]...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.5.00620140820-fc14-32bit
SF_Core Library: v1.7.1.20140820-fc14-32bit

Copyright 2010-2012, LSI Corporation, All Rights Reserved Worldwide.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[Wed 01/16/2019 17:20:58] - SF_Genesis has been invoked with the following parameters:

                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                      argv[1]: -PROCESS_SSD
                      argv[2]: 23:0:0:0
                      argv[3]: /root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/FW_PPRO_6_1_8_Release.1115287.release.123456.mfp
                      argv[4]: /root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/25139.123456.driveconfig
                      argv[5]: 399205758
                      argv[6]: 399205758
                      argv[7]: LOG=/root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/399205758_Linux_DATETIMESTAMP_23.0.0.0_PROCESS_SSD_RESULT.log
                     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Wed 01/16/2019 17:20:58] - Instructing the operating system to purge any existing cached data for device: '23:0:0:0'
[Wed 01/16/2019 17:21:03] - Issuing a discovery command for device: '23:0:0:0'
[Wed 01/16/2019 17:21:08] - Discovery command completed...
[Wed 01/16/2019 17:21:08] - Waiting 5 seconds for the system to settle...
[Wed 01/16/2019 17:21:13] - Device designation string '23:0:0:0' is mapped to node '/dev/sg2'
[Wed 01/16/2019 17:21:13] - Power Management enforcement enabled.
[Wed 01/16/2019 17:21:13] - Proceeding to process SSD device with the following parameters:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
              DeviceName = /dev/sg2
    MFP Package Filename = /root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/FW_PPRO_6_1_8_Release.1115287.release.123456.mfp
      Configuration File = /root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/25139.123456.driveconfig
              Serial No. = 399205758
         World Wide Name = 399205758
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Wed 01/16/2019 17:21:13] - Successfully received the IDENTIFY data from the drive...
[Wed 01/16/2019 17:21:13] - Validating Manufacturing Firmware Package: /root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/FW_PPRO_6_1_8_Release.1115287.release.123456.mfp
[Wed 01/16/2019 17:21:17] - Successfully opened the package: /root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/FW_PPRO_6_1_8_Release.1115287.release.123456.mfp
[Wed 01/16/2019 17:21:17] - file  /root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/25139.123456.driveconfig Loaded successfully
[Wed 01/16/2019 17:21:23] - B01 Power Management configuration request detected
[Wed 01/16/2019 17:21:23] - B01 Power Management conforms to hardware version 0x0
[Wed 01/16/2019 17:21:23] - Successfully extracted *.DriveConfig file: /root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/25139.123456.driveconfig
[Wed 01/16/2019 17:21:23] - Extracted Config_ID: 1 (25139) in DriveConfig file: /root/mpt/FW_PPRO_6_1_8_Release.1115287.release--123456/25139.123456.driveconfig
[Wed 01/16/2019 17:21:23] - Extracted SerialOutputControl: 0
[Wed 01/16/2019 17:21:23] - Extracted Enable DLC: 0
[Wed 01/16/2019 17:21:23] - Searching for flashware image for configuration 25139
[Wed 01/16/2019 17:21:23] - Manifest found for configuration 25139
[Wed 01/16/2019 17:21:23] - Flashware image extracted: 25139_fw_cl_slc_Toshiba_16Gb_TH58TAG7S2FBA89_4Q_4C_2D_PP_R00468_s512.vic
[Wed 01/16/2019 17:21:23] - Searching for manufacturing image for configuration 25139
[Wed 01/16/2019 17:21:23] - Manifest found for configuration 25139
[Wed 01/16/2019 17:21:23] - Manufacturing image extracted: 25139_mf_slc_Toshiba_16Gb_TH58TAG7S2FBA89_4Q_4C_2D_PP_R00468_s512.vic
[Wed 01/16/2019 17:21:23] - Proceeding in ROM mode, download feature 3...
[Wed 01/16/2019 17:21:24] - Successfully downloaded MFB to the drive...
[Wed 01/16/2019 17:21:24] - Waiting (5 sec) for the drive to settle...
[Wed 01/16/2019 17:21:29] - Successfully received the IDENTIFY data from the drive...
[Wed 01/16/2019 17:21:29] - Firmware revision reported to be: '618ABBM0'.  This indicates MFB download was successful.
[Wed 01/16/2019 17:21:29] - Successfully enabled SMART capabilities...
[Wed 01/16/2019 17:21:31] - Successfully issued a diagnostic unlock...
[Wed 01/16/2019 17:21:32] - Performing the FORMAT Command with the following parameters:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
         MemoryWearCycleCapability = 0
              CurrentPE_CycleCount = 0
                     LifeInSeconds = 0
                   LogicalCapacity = 390721968
                        SectorSize = 512
             SectorAlignmentOffset = 0
                  ExpectedMemoryID = 55192 (0xD798)
                   ExpectedNumDies = 0
               SerialOutputControl = 0
                           Time[8] = 0x0000000000000000
            MiscFlag_Erase_R_Block = 0
     MiscFlag_PanicHandlingEnabled = 0
        MiscFlag_PanicOnSATA_Error = 0
  MiscFlag_WriteThrottlingTestMode = 0
      MiscFlag_DisableUserBandECCX = 0
                        L_PageSize = 0
                        E_PageSize = 0
              ErrorCorrectionPower = 0
      ConfigDeviceReadDisturbCount = 0
   ConfigDeviceReadDisturbCountLow = 0
                        Enable DLC = 0
                  ExtraOptions_0_1 = 0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[Wed 01/16/2019 17:21:39] - FORMAT command completed...
[Wed 01/16/2019 17:21:39] - Waiting (2 sec) for the drive to settle...
[Wed 01/16/2019 17:21:41] - Setting up the stamp information through CDU command...
[Wed 01/16/2019 17:22:04] - Failure reading drive configuration data: (0x12000005:SF_SG_HOST_ABORT_ERROR)
[Wed 01/16/2019 17:22:04] - FATAL_ERROR: Could not perform the ReadDriveConfigUnique() operation on the drive... (0x10090109:SF_GENESIS_CDU_ERROR_BAD_TARGET_ERROR)
[Wed 01/16/2019 17:22:04] - End of Genesis manufacturing log.
[Wed 01/16/2019 17:22:04] - Exiting...
[Wed 01/16/2019 17:22:04] - Overall Result for Device: /dev/sg2 ****** FAIL ******


Process exited with code 9
求大神帮忙解决
固件是25139和25140都不行
M币换购:工善必利器,您的拆机好伴侣~数码之家X22精密型螺丝刀套装(拆客必备系列)
 
离线perter

发帖
6730
M币
1920
专家
11
粉丝
136
只看该作者 1楼 发表于: 01-16
不知道你从哪弄得175的开卡程序,印象里这是不公开的,话说如果没错电源管理换成B01或者B02试试,你这版本就这两个,都可以试试~~~~

发帖
22
M币
38
专家
0
粉丝
2
只看该作者 2楼 发表于: 01-16
回 perter 的帖子
perter:不知道你从哪弄得175的开卡程序,印象里这是不公开的,话说如果没错电源管理换成B01或者B02试试,你这版本就这两个,都可以试试~~~~ (2019-01-16 18:50) 回 perter 的帖子

都试过了,不行
离线perter

发帖
6730
M币
1920
专家
11
粉丝
136
只看该作者 3楼 发表于: 01-16
回 程峰网维科技 的帖子
程峰网维科技:都试过了,不行 (2019-01-16 19:03) 回 程峰网维科技 的帖子

你先用2281的看看能不能开过,另外不知道你这板子上的什么之前,这个需要打开土狗供电的。。。。

发帖
22
M币
38
专家
0
粉丝
2
只看该作者 4楼 发表于: 01-16
perter<blockquote class="blockquote3"><div class="text" style="padding:15px;"><a href="http://bbs.mydigit.cn/u.php?username=程峰网维科技" target="_blank">程峰网维科技</a><span style="color:gray ">:</span>都试过了,不行<span style="color:gray "> (2019-01-16 19:03) </span><a href="http://bbs.mydigit.cn/job.php?action=topost&tid=2642599&pid=76782885" target="_blank" onclick="return checkUrl(this)" id="url_4"><img src="http://bbs.mydigit.cn/images/back.gif" border="0" onclick="if(this.parentNode.tagName!='A'&&this.width>=740) window.open('http://bbs.mydigit.cn/images/back.gif');" style="max-width:100%;" onload="if(is_ie6&&this.offsetWidth>740)this.width=740;" title="回 程峰网维科技 的帖子" alt="回 程峰网维科技 的帖子"></a><br></div></blockquote><br>你先用2281的看看能不能开过,另外不知道你这板子上的什么之前,这个需要打开土狗供电的。。。。
      
是用跳线电阻,还是在软件里设置
离线350950537

发帖
84
M币
75
专家
1
粉丝
19
只看该作者 5楼 发表于: 01-17
好奇下,7S2F是单贴4ce的,2582支持64CE吗?2281最大支持多少CE?

发帖
22
M币
38
专家
0
粉丝
2
只看该作者 6楼 发表于: 01-20
回 350950537 的帖子
350950537:好奇下,7S2F是单贴4ce的,2582支持64CE吗?2281最大支持多少CE? (2019-01-17 09:29) 回 350950537 的帖子

SF主控最大支持64CE

发帖
86
M币
304
专家
2
粉丝
16
只看该作者 7楼 发表于: 01-20
FATAL_ERROR: Could not perform the ReadDriveConfigUnique() operation on the drive... (0x10090109:SF_GENESIS_CDU_ERROR_BAD_TARGET_ERROR)
感觉这个像是开卡配置参数有问题了~ 或者是板上跳线有问题。2582的都不知道跳线在哪……

发帖
22
M币
38
专家
0
粉丝
2
只看该作者 8楼 发表于: 01-20
回 新奇小子007 的帖子
新奇小子007:FATAL_ERROR: Could not perform the ReadDriveConfigUnique() operation on the drive... (0x10090109:SF_GENESIS_CDU_ERROR_BAD_TARGET_ERROR)
感觉这个像是开卡配置参数有问题了~ 或者是板上跳线有问题。2582的都不知道跳线在哪……
 (2019-01-20 18:05) 回 新奇小子007 的帖子

配置参数不知道,但是跳线绝对没有问题

离线jackylv

发帖
32
M币
619
专家
1
粉丝
8
只看该作者 9楼 发表于: 03-24
搞定没有啊?
快速回复
限80 字节
如果您提交过一次失败了,可以用”恢复数据”来恢复帖子内容
 
上一个 下一个